User`s guide

ZyAIR B-5000 User’s Guide
Firewall 28-7
Figure 28-5 Firewall General Parameters
The following table describes the labels in this screen.
Table 28-2 Firewall General Parameters
LABEL DESCRIPTION
Web Manager on
PORT
Type the port through which you can access the web configurator to manage your
ZyAIR. 2000 is the factory default.
For example, if your IP address is 192.168.1.1 and web manager port is specified as
2000. Connect to http://192.168.1.1:2000/ to enter the web configurator.
Disable Remote
Manager from
WAN Side
Select this to disallow web configurator access from the WAN. By default, you
connect to web configurator System Setup page from the WAN side or the LAN side
(wireless LAN).
Disable Ping
from WAN Side
Select this to not respond to pings from any host on the WAN side.
FINISH
Click FINISH to save your changes back to the ZyAIR.
CANCEL
Click CANCEL to begin configuring this screen afresh.
28.6 Firewall Access Control
Use the firewall’s access control feature to enable rules for source and destination IP addresses, net masks
and port services.