User`s guide

ZyAIR B-5000 User’s Guide
27-10 Firmware and Configuration File Maintenance
Figure 27-9 Example Image File Upload
27.7 Resetting Your ZyAIR
If you forget your system password you may have to reset your ZyAIR to factory defaults. To reset your
ZyAIR to factory defaults, enter a console session and the Terminal emulation console.
Step 1. Enter HyperTerminal and type [ESC] to go to the status screen. This will reboot the ZyAIR.
Step 2. Type d or D to reset.
Figure 27-10 Resetting Your ZyAIR
Step 3. You will be given a choice to erase configuration to default.
Step 4. Type y and [ENTER] to reset to the default configuration.
Type the configuration file’s
location, or click Browse to search
for it.
Choose the 1K Xmodem protocol.
Then click Send.
Press 's' or 'S' to show Current Network Status.
Press 'd' or 'D' to reset to default.
Press 'Esc' to reboot.