User`s guide

ZyAIR B-5000 User’s Guide
Firmware and Configuration File Maintenance 27-5
Figure 27-4 File Backup Complete
27.3 Restore Configuration Example Using HyperTerminal
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
Please note that you must wait for the system to automatically restart after the file transfer is complete.
Step 1. Enter HyperTerminal and type [ESC] to go to the status screen. This will reboot the ZyAIR.
Step 2. When the HyperTerminal screen shows EDORAM Testing, enter X to go to a console mode.
Step 3. A cursor appears. Type DLSC and press [ENTER].
Step 4. When CCC…… appears you will need to restore the file.
Step 5. Click Transfer and Send File in the Hyperterminal window.
Step 6. Choose the file name that you want to restore using the Browser. The file name has a .cfg
extension.
Step 7. Set the sending protocol as a 1K Xmodem.
Step 8. Click Send.
Step 8. Click OK.
A file upgrade complete message will appear. Your configuration file has been successfully restored.
-Getsc
Ready to send soho.cfg ... Complete!!