User`s guide

ZyAIR B-5000 User’s Guide
26-4 Command Examples
Figure 26-7 SU *Interface
Attrib <Disable | Enable> <Global | Virtual>
Bridge <Disable | Enable>
WAN 1
Address <ip> <netmask>
Link type <Disable | Ethernet | PPP | PPPoE>
Attrib <Disable | Enable> <Global | Virtual>
Bridge <Disable | Enable>
Ether_interface <interface>
ISP <ISP Index> <dialup timeout> <Dial priority>
WAN 2
Address <ip> <netmask>
Link type <Disable | Ethernet | PPP | PPPoE>
Attrib <Disable | Enable> <Global | Virtual>
Bridge <Disable | Enable>
Ether_interface <interface>
ISP <ISP Index> <Idle disconnect time> <Dial priority>
Figure 26-8 SU Packet Filter
Packet
Filter
Module
Attrib <Disable | Enable>
Add Protocol
<IP | TCP | UDP | ICMP >
Source
add source <Any | ip> [Any |
netmask] [port]
Destination
add destination <Any | ip>
[Any | netmask] [port]
Delete
Delete <0~14>
Reset_counter
reset_counter <0~14>