User`s guide

ZyAIR B-5000 User’s Guide
24-4 SMT Main Screen
Table 24-3 Sys_info Mode
LABEL DESCRIPTION
Model This is your ZyAIR B-5000 Outdoor Access Point & Bridge.
Software Version This displays the most recent software upgrade number.
Build This is the compilation number of this version.
CPU This displays the type and speed of the Central Processing Unit.
RAM This displays the Random Access Memory of the ZyAIR.
Flash This displays the nonvolatile storage that can be electrically erased and
reprogrammed so that data can be stored, booted and rewritten as
necessary.
Chipset This displays the chip model.
Firmware Version This displays the most recent firmware upgrade number.
Server IP Address This field displays the server IP address that the ISP assigns to the ZyAIR.
Host Name This is the host name for the Bridge and Access Point, high speed WLAN in
this case.
24.5 Ping Test
The following screen shows the information required for a ping test.
Step 1. Enter the IP address of the ZyAIR
Step 2. Enter the number of packets that you want to send.
Step 3. Enter the data size.
Figure 24-3 Ping Test
Command : ping <ip> [1~65534|-t] [1~1999]
Message : Please input the following information.
IP address <ip> :
N
umber of ping request packets to send (TAB Select) : None
Data size [1~1999] :