User`s guide

ZyAIR B-5000 User’s Guide
SMT Main Screen 24-1
Chapter 24
SMT Main Screen
In this screen you can change the system configuration via supervisor mode, display system
information, ping a computer to test the connection or end the Telnet session.
24.1 SMT Main Screen Overview
You can access the following screen via Telnet or a terminal emulation programme such as HyperTerminal.
Figure 24-1 SMT Main Screen via Telnet or HyperTerminal
ZyAIR-B5000 RS232 Daemon Version 1.5.8.200
-------------------------------------------------------------------------------
>> su Change to supervisor(root) mode
sys_info Show system information
ping Ping test
exit Disable privilidge command or disconnect
-------------------------------------------------------- [ Privilege : USER ]
Command : su <password>
Message :
-------------------------------------------------------------------------------
'UP/DOWN' Move, 'RIGHT/LEFT' Select/Unselect, 'Home/End' Top/Bottom [^Q-Help]