User`s guide

ZyAIR B-5000 User’s Guide
23-2 Accessing the ZyAIR via Telnet or Console Port
Step 4. In the telnet window, enter the user name and user password as shown (user1 is the factory
default user name and test is the factory default user password) and press [ENTER] to see the
main screen as shown in Figure 23-3. See section 26.3 to change the user name and password.
Figure 23-2 Login via Telnet
Figure 23-3 Main Screen via Telnet
ZyAIR-B5000 RS232 Daemon Version 1.5.8.200
-------------------------------------------------------------------------------
>> su Change to superviser(root) mode
sys_info Show system information
ping Ping test
exit Disable privilidge command or disconnect
-------------------------------------------------------- [ Privilege : USER ]
Command : su <password>
Message :
-------------------------------------------------------------------------------
'UP/DOWN' Move, 'RIGHT/LEFT' Select/Unselect, 'Home/End' Top/Bottom [^Q-Help]
User Name : user1
User Password : ****