User`s guide

ZyAIR B-5000 User’s Guide
22-6 Utility
Table 22-2 Utility Software Upgrade
LABEL DESCRIPTION
Upgrade Mode
There are three types of images that can be upgraded, Program, Web and
Configuration Images.
Program Image: This is the ZyAIR firmware.
Web Image: This is the web image file. This file should be uploaded with
the Program Image file.
Config Image: This is the configuration file on the ZyAIR. Uploading this
file replaces the entire SOHO file system, including your ZyAIR
configurations, system-related data (including the default password), the error
log and the trace log.
Refer to the Firmware and Configuration File Maintenance Chapter.
Upgrade Filename This displays the upgrade filenames.
soho.bin: This is a binary file of firmware.
pfs.img: This is a web configurator image file.
soho.cfg: This is the ZyAIR configuration file.
OK
Click OK to start the upgrade.
CANCEL
Click CANCEL to begin configuring the Software Upgrade screen afresh.
22.5 Wireless Link Info
This screen is accessible for Remote Wireless Bridge in Bridge mode only.
The following screen is accessible only when the ZyAIR has been set as a Bridge in operating mode and as
a Remote Wireless Bridge (see Quick Setup chapter). After saving the configuration and restarting the
system, the Wireless Link Info will be available when you select UTILITY.