User`s guide

ZyAIR B-5000 User’s Guide
Configuration Scenarios 21-11
Step 3. Select Central Wireless Router to set the ZyAIR to operate in router mode. You also need to
select the Ethernet connection type in Dynamic IP address (DHCP Client), and then click
NEXT.
Step 4. Configure TCP/IP Parameters.
Step 5. Enter the Wireless interface IP address and Wireless interface Net Mask that are suitable for
your wireless network.
Step 6. You may have to configure two network settings in the Gateway and DNS tabs of each wireless
client’s computer to surf the Internet, or you can enable DHCP server services for all wireless
clients.
Step 7. In General DHCP server parameters, enter the Assign Default Gateway, Assign Net Mask,
Assign Name Server, DHCP Start IP, DHCP End IP and choose Apply Interface on HWLAN
to make DHCP server services available for wireless network. Click NEXT.
Step 8. Configure IEEE 802.11b WLAN parameters.
Step 9. Enter the Channel, rts Threshold, frag Threshold, SSID and Station Name that are suitable
for your radio network and then click the radio button to disable WEP or enable 64/128 bit WEP
services, if WEP is enabled, you must input a corresponding Default Key index and WEP Key.
Click NEXT.
Step 10. Review the configured settings of the ZyAIR.
Step 11. Click the SAVE button to store the changes back to your ZyAIR.
Step 12. Click the RESTART button to take effect the configuration changes.
21.2.5 Configure the ZyAIR as a Central Wireless Router with Static IP
Address (Fixed IP)
Step 1. Select BRIDGE as the operating mode, click NEXT.
Step 2. Click QUICK CONFIG and select Central Wireless Router/Bridge.
Step 3. Select the Ethernet connection type in Static IP address (Fixed IP) and then click NEXT.
Step 4. Configure TCP/IP parameters.
Step 5. Enter the Wireless interface IP and Wireless interface Net Mask that are suitable for your
wireless network, and specify the Ethernet IP address and Ethernet Net Mask of the Ethernet
interface. Enter the Default Gateway as the IP address of the broadband device connected to the
ZyAIR or the IP address of the Gateway in your Ethernet environment and the IP address of the
DNS servers provided by your ISP in the DNS server field.