User`s guide

ZyAIR B-5000 User’s Guide
SNMP 19-5
Table 19-2 Advanced Configuration SNMP Community Modify
LABEL DESCRIPTION
FINISH
Click FINISH to begin modifying SNMP Community Parameters afresh.
CANCEL
Click CANCEL to begin modifying SNMP Community Parameters afresh.
19.5 SNMP Trap Overview
The ZyAIR will send traps to the SNMP manager when any one of the following events occurs:
Table 19-3 SNMP Traps
TRAP # TRAP NAME DESCRIPTION
1 coldStart (defined in RFC-1215) A trap is sent after booting (power on).
2 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
The following table maps the physical port and encapsulation to the interface type.
Table 19-4 Ports and Interface Types
PHYSICAL PORT/ENCAP INTERFACE TYPE
LookBack (virtual) if0
Wireless if1 enet-encap
Ethernet if2 enet-encap
PPPoE if3 pppoe-encap
19.6 SNMP Trap Parameters Configuration
To view your ZyAIR’s SNMP Trap settings, click ADVANCED CONFIG, SNMP TRAP. The screen
appears as shown.