User`s guide

ZyAIR B-5000 User’s Guide
18-2 Bridging Parameters
Table 18-1 Advanced Configuration Bridging Parameters
LABEL DESCRIPTION
General Bridge Parameters
Bridge Function
Select the radio button to Disable or Enable the bridge function of your ZyAIR,
depending on whether you want to set it as a router or a bridge. See Part IV for more
information on setting this up.
IP Address This parameter specifies the IP bridge address of the gateway. 192.168.1.1 is the
factory default, the default IP address of the ZyAIR.
Subnet Mask This parameter specifies the subnet mask of the final destination. 255.255.255.0 is the
factory default, the subnet mask of the ZyAIR.
FINISH
Click FINISH to save the parameters back to your ZyAIR.
CANCEL
Click CANCEL to begin configuring the Bridging Parameters screen afresh.