User`s guide
ZyAIR B-5000 User’s Guide
17-2 Static Route
Figure 17-2 Advanced Configuration Static Route Parameters
The following table describes the labels in this screen.
Table 17-1 Advanced Configuration Static Route Parameters
LABEL DESCRIPTION
Table of Current Static Route Entries
Index This field displays an individual static route index number.
Network
Address
This parameter specifies the IP network address of the final destination.
Subnet Mask This parameter specifies the subnet mask of the final destination.
Gateway This field displays the IP address of the gateway. The gateway is an immediate
neighbor of your ZyAIR that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your ZyAIR.
Add
To add a static route to your table, type Network Address, Subnet Mask and
Gateway parameters into the empty spaces of the last index entry without a radio
button. Click add and then click FINISH to save these as a static route entry. A radio
button should appear beside the latest entry.
Delete To remove a static route on the ZyAIR, select the radio button next to the static route
index number you want to remove, then click Delete.