User`s guide

ZyAIR B-5000 User’s Guide
MAC Filter 14-1
Chapter 14
MAC Filter
This chapter provides information on the MAC Filter of your ZyAIR.
14.1 MAC Filter Overview
The MAC filter screen allows you to configure the ZyAIR to block access to devices or block the devices
from accessing the ZyAIR. Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen.
To change your ZyAIR’s MAC filter settings, click BASIC CONFIG, Wireless LAN and then MAC Filter.
The screen appears as shown.
Figure 14-1 Basic Configuration MAC Filter
The following table describes the labels in this screen.