User`s guide

ZyAIR B-5000 User’s Guide
11-4 Server Mapping
Figure 11-2 Basic Configuration Server Mapping Add
The following table describes the labels in this screen.
Table 11-3 Basic Configuration Server Mapping Add
LABEL DESCRIPTION
Table of Current Virtual Server Entries
Index This is the rule index number assigned to each new virtual server entry.
Service Name Enter a unique name for identification purposes. You may enter up to 16 octets, ASCII
characters.
Protocol Select TCP or UDP, see sections 11.1 and 11.2.
Public Access
Interface Select the interface you want to map from public access, Ethernet or Wireless.
Port Number Enter the number of the port you want to map.
Virtual Server
IP Address Enter the IP address of your virtual server in dotted decimal notation.
Port Number Enter the number of the port you want to use.
OK
Click OK to add the virtual server entry to your list of virtual server entries.
Cancel
Click Cancel to begin configuring the Server Mapping edits screen afresh.
FINISH
Click FINISH to save the changes to your ZyAIR.
CANCEL
Click CANCEL to begin configuring the Server Mapping screen afresh.