User`s guide

ZyAIR B-5000 User’s Guide
10-4 DHCP Parameters
10.6 DHCP Host Entry
You see this screen when you select Add in the previous DHCP Parameters screen. This screen allows you
to enter the Ethernet and Internet address for your fixed host entries.
Figure 10-2 Basic Configuration DHCP Parameters Edit
The following table describes the labels in this screen.
Table 10-2 Basic Configuration DHCP Parameters Edit
LABEL DESCRIPTION
DHCP Client Setting (Read Only)
Interface The ZyAIR acts as a DHCP client. It receives an IP address, subnet mask and default
gateway IP address from a DHCP server.
Select Disable, Wireless or Ethernet.
If you Disable this, then you must assign the ZyAIR a static IP address. When not
disabled, select the interface (Wireless or Ethernet) on which it can receive IP
address information from a DHCP server.
Trigger DHCP
Service
This displays whether or not your ZyAIR acts as a DHCP server and gives IP
addresses to the clients. The default is set to Disable.