Vantage Access Auto Configuration Server Quick Start Guide

ENGLISH

The following shows an example for two ZyXEL compatible devices.

7.2 Importing Devices

Follow the steps below to import your device(s).

1 Log into Vantage Access as root and click the Provision Manager icon.

2 Click Device Pre-Provision > Import Devices in the

navigation panel.

3 To import one device, select Import Single Device and

enter the device information in the fields provided.

To import more than one device, select Import Multi-Devices

and specify the location and name of the XML file or click

Browse to locate it.

4 Click Import.

5 When the file import is successful, you should see the new entry(ies) in the

Device List panel.The Status field displays Unregistered. To complete the

device registration, see Section 7.3 on page 12.

If you cannot see the new entry(ies), check the system logs and make sure the

XML file format is correct.

7.3 ZyXEL Device Setting

You must configure the managed device to allow remote management from Vantage Access.

Refer to the user’s guide that comes with your compatible device for more information. The

following shows how to enable TR-069 communication protocol between a ZyXEL compatible

device and Vantage Access.

1 To activate TR-069 on the ZyXEL compatible device, access the CLI and enter the following

commands.

<?xml version="1.0" encoding="UTF-8"?>

<deviceName>Device1</deviceName>

</Device>

<deviceName>Device2</deviceName>

</Device>

</Template>

wan tr load Enables TR-069 configuration.