User`s manual

ManualsBrandsZyXEL Communications ManualsNetwork CardADSL2+ Ethernet Gateway P-660R-T Series

P-660R-F1 Support Notes

(Set the source IP address for the rule: Start=192.168.1.2, end=192.168.1.20)

ip policyrouting set criteria srcport 0

(Set the source port for the rule: Start=0)

ip policyrouting set criteria destip 0.0.0.0

(Set the destination port for the rule: Start=0.0.0.0)

ip policyrouting set criteria destport 80 80

(Set the destination port for the rule: Start=80, end=80)

ip policyrouting set action actmatched

(Set the action for the rule: Matched)

ip policyrouting set action gatewaytype 0

(Set gateway type for the rule: Gateway Address)

ip policyrouting set action gatewayaddr 192.168.1.254

(Set the gateway address for the rule: 192.168.1.254)

ip policyrouting set criteria serviceType 0



ip policyrouting set criteria precedence 8

r this rule)

ip policyrouting set action log no

(Set log option for the rule: no log)

ip polictrouting set save

(Save the rule)

Step 3: Apply the IP policy routing. There are two interfaces to apply the policy

set, they are the LAN interface and WAN interface. It depends where the

gateway specified in the policy rule is located. If the gateway you specified is

located on the local LAN you apply the policy set in LAN interface. If the gateway

you specified is located on the remote WAN site you apply the policy set in WAN

interface.

Apply to WAN Interface (Suppose we apply it to remote node 1 in the example):

wan node index 1

wan node ippolicy 1

11. Using Call Scheduling

 What is Call Scheduling?

Call scheduling enables the mechanism for the P-660R-F1 to run the remote

node connection according to the pre-defined schedule. This feature is just like

the scheduler ina video recorder which records the program according to the

specified time. Users can apply at most 4 schedule sets in Remote Node. The

remote node configured with the schedule set could be "Forced On", "Forced

Down", "Enable Dial-On-Demand", or "Disable Dial-On-Demand" on specified

date and time.

 How to configure a Call Scheduling?

You can configure a call scheduling in CLI

Suppose we want to edit a call schedule set like this:

Call Schedule Set #=1

Set name=Test

Active= Yes

Start Date(yyyy-mm-dd)= 2005 - 12 - 27

How Often= Once

Once: