User`s manual

P-660R-F1 Support Notes

Key Settings:

Option

Descriptions

Get

Community

Enter the correct Get Community. This Get Community must match

the 'Get-' and 'GetNext' community requested from the NMS. The

default is 'public'.

Set

Community

Enter the correct Set Community. This Set Community must match

the 'Set-community requested from the NMS. The default is 'public'.

Trusted Host

Enter the IP address of the NMS. The P-660R-F1HW-DX will only

respond to SNMP messages coming from this IP address. If 0.0.0.0

is entered, the P-660R-F1HW-DX will respond to all NMS

managers.

Trap

Community

Enter the community name in each sent trap to the NMS. This Trap

Community must match what the NMS is expecting. The default is

'public'.

Trap

Destination

Enter the IP address of the NMS that you wish to send the traps to.

If 0.0.0.0 is entered, the P-660R-F1HW-DX will not send trap

any NMS manager.

Note: You may need to edit a firewall rule to permit SNMP Packets.

8. Using syslog

You can configure it in Web Configurator, Advanced Setup, Maintenance -> Logs

-> Log Settings -> Syslog logging.