User`s manual

P-660R-F1 Support Notes

The Class Setup Screen

Use this screen to add, edit or delete classifiers. A classifier groups traffic into data

flows according to specific criteria such as the source address, destination

address, source port number, destination port number or incoming interface. For

example, you can configure a classifier to select traffic from the same protocol port

(such as Telnet) to form a flow.

The following table describes the labels in this screen.

LABEL

DESCRIPTION

Create a new Class

Click Add to create a new classifier.

This is the number of each classifier.

The ordering of the classifier is

important as the classifiers are applied

in turn.

Active

Select the check box to enable this

classifier.

Name

This is the name of the classifier.