User`s manual

P-660R-F1 Support Notes

2. Internet Access Using P-660R-F1 under Routing mode

For most Internet users having multiple computers want to share an Internet

account for Internet access, they have to install an Internet sharing device, like a

router. In this case, we use the P-660R-F1 which works as a general Router plus

an ADSL Modem.

Set up your workstation

(1) Ethernet connection

Connect the LAN ports of all computers to the LAN Interface of P-660R-F1 using

Ethernet cable.

(2) TCP/IP configuration

Since the P-660R-F1 is set to DHCP server as default, so you need only to

configure the workstations as the DHCP clients in the networking settings. In this

case, the IP address of the computer is assigned by the P-660R-F1.

The P-660R-F1 can also provide the DNS to the clients via DHCP if it is available.

For this setup in Windows, we check the option 'Obtain an IP address

automatically' in its TCP/IP setup. Please see the example shown below.