P-660H-D Series ADSL2+ 4-port Gateway Quick Start Guide Version 3.
P-660H-D Series Quick Start Guide Overview The P-660H-D is an ADSL router with a four-port built-in switch. See your User’s Guide for background information on all features. How to use the included CD This CD provides multi-media animations that help you set up your P-660H-D. 1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial. 2 At the end of the tutorial, click Configuration Genie.
P-660H-D Series Quick Start Guide 3 POWER: Use the power adaptor provided with your P-660H-D to connect an appropriate power source to the POWER socket. Make sure the power source is on. 4 Push in the POWER button. Look at the lights on the front panel. • The POWER light and the DSL light blink while your P-660H-D starts up and stay on once the DSL connection is ready. The INTERNET light is on when you are able to access the Internet and blinks when the P-660H-D is sending or receiving data.
P-660H-D Series Quick Start Guide 3 See the User’s Guide for field descriptions of the Status screen. 3 Internet Setup 1 Open your web browser, and go to http://www.zyxel.com. Your P-660H-D tries to detect your Internet connection. Wait for the P-660H-D to finish detection. If any other screens appear, follow the directions in the screen. If the web page opens correctly, your P-660H-D is ready for you to use. If the web page does not open, follow the rest of the steps.
P-660H-D Series Quick Start Guide 4 Follow the directions in the screens. 5 Click Go to Wizard setup. Then, click Apply. 6 Click INTERNET SETUP. Wait while your P-660H-D tries to detect your DSL connection. 7 Follow the directions in the wizard. Do not change default settings if your ISP did not provide information.
P-660H-D Series Quick Start Guide A) Check the lights on the front panel. If they are different than what is described in section 1, make sure the connections are correct. (See section 1.) If the lights are still different, turn off the device, wait a few seconds, and turn it on again. B) Follow the steps in section 3 again. Make sure you enter the correct information. For example, if your account has a user name and password, make sure you type it correctly.
