User`s guide

7–7
7
V.25bis Autodialing and Synchronous Dial-Up Operation
Disregard Incoming
Call (DIC)
Causes the modem to disregard an incoming call, even if
the modem has been configured for auto-answer. If DIC
is issued when the modem is not set for auto-answer,
an INV (invalid) message is returned to the DTE. This
command must be entered for each incoming call you
wish to disregard.
Program Number
(PRN)
Causes the modem to store a dial string into a specified
memory location.
COMMAND DESCRIPTION
PRNn Program number
0-3 Identifies the memory location in which
the dial string is to be stored, where 0 is
memory location 0, 1 is memory location
1, and so forth
; Serves as a separator between the
memory address referenced and the dial
string to be stored. For example, PRN
1;1-510-783-2538 stores 1-510-783-2538
into memory location 1
space Clears the memory location that follows it
in the command string. For example,
PRN 0 clears memory location 0