User`s manual

XP8300/XP8400/SE110082 s Simulated PLCBus Connections

Table D-1. PIO to PLCBus Signal Map

BL1400/Bl1500 Expansion Board

H3 Pin No. PIO Port Signal Pin No. PLCBus Signal

1 VCC (+5 V) 2 VCC (+5 V)

2PA05/STBX

3PA119D0X

4PA220D1X

5PA317D2X

6PA418D3X

7 PA5 11 A1X

8PA69A2X

9PA77A3X

10 GND 10 GND

BL1400 or BL1500

XP8300 and XP8400 expansion boards may be connected to header H3 on

either the BL1400 or the BL1500. To add these expansion boards, the user

must either make a custom cable or use an adapter board (Z-World part

number 101-0050). To assist with making the connection via a ribbon

cable, Table D-1 maps the signals from the controllers PIO to the expan-

sion board PLCBus. Dynamic Cs EZIOMGPL.LIB library may be used

for programming.

The adapter board provides an easy way to add XP8300 or XP8400 expan-

sion boards to either a BL1400 or a BL1500 controller. Power is supplied to

the controller via the power jack

and to the expansion board via

a screw terminal. For specifics

on how to install an adapter

board with a specific controller,

see that controllers users

manual.

Use the appropriate external

voltage supply with expansion

boards connected to the

BL1400 and BL1500.

Adapter Board

+VGND

Controller Power

PLCBus Power

Controller

Expansion Board

Figure D-3. Adapter Board Connections