User`s manual

XP8300/XP8400/SE110078 s Connecting and Mounting Multiple Boards
(
Bus Connectors
Controller
Modular PC
Board Holders
DIN Rail
Expansion Cards
Mounting
The XP8300, XP8400, and SE1100 expansion boards can be installed in
modular plastic circuit-board holders attached to a DIN rail, a widely used
mounting system, as shown in Figure C-3.
The circuit-board holders are 77 mm wide and come in lengths of
11.25mm, 22.5 mm , and 45 mm. The holders, available from Z-World
and from other suppliers, snap together to form a tray of almost any length.
Z-Worlds expansion boards are 72 mm wide and fit directly in these
circuit-board holders.
Z-Worlds expansion boards can also be mounted with plastic standoffs to
any flat surface that accepts screws. The mounting holes are 0.125 inches
(1/8 inch) in from the edge of a board, and have a diameter of 0.190 inches.
Figure C-3. Mounting Expansion Boards on DIN Rail
For information on ordering DIN rail mounts, call your
Z-World Sales Representative at [phone].