User Guide

ManualsBrandsZVOX ManualsElectronicsZVOX SoundBase 570 30" Sound Bar with Built-In Subwoofer, Bluetooth, AccuVoice Dialogue Boost

Alternative Adjustment Guide For Some Remote Controls

Issued by Large Cable and Satellite Providers.

DirecTV, Dish, Comcast, Verizon FIOS and AT&T remotes are described.

If you have one the remote controls described in this sheet,

the directions provided overcome the following issues:

1) Your TV remote does not work properly after using the ZVOX

Audio “Teach Your ZVOX to Learn the Remote” feature.

2) You TV does not allow you to turn off its internal speakers.

(866) 367-9869 | info@zvoxaudio.com

Summary of content (8 pages)

PAGE 1
Alternative Adjustment Guide For Some Remote Controls Issued by Large Cable and Satellite Providers. DirecTV, Dish, Comcast, Verizon FIOS and AT&T remotes are described. If you have one the remote controls described in this sheet, the directions provided overcome the following issues: 1) Your TV remote does not work properly after using the ZVOX Audio “Teach Your ZVOX to Learn the Remote” feature. 2) You TV does not allow you to turn off its internal speakers. (866) 367-9869 | info@zvoxaudio.
PAGE 2
A ZVOX Audio system “learn your remote” feature does not work with DirecTV remotes in our standard manner. The following instructions should be used to configure a DirecTV remote. DirecTV remote RC65 and many other DirecTV remotes: Configure the ZVOX Audio speaker: On the front panel of the ZVOX Audio speaker: a) Press and hold down both the Mute/Power button and the Volume Up button until you see “PS” on the display. b) Release the buttons.
PAGE 3
Dish Network Remote 20.1 IR or 21.0 IR: These instructions describe how to configure your Dish Network remote to control the volume from your ZVOX Audio system and not from your TV. The following instructions apply to any TV brand except Panasonic. If you have a Panasonic TV, use the alternate instructions below. FOR ANY TV BRAND EXCEPT PANASONIC: Part 1: Configure the ZVOX system 1. Power on your ZVOX system. 2.
PAGE 4
Comcast Custom DVR 3-Device Universal Remote Control These instructions describe how to configure your Comcast cable remote to control the volume from your ZVOX Audio system and not from your TV. The following instructions apply to any TV brand except Panasonic. If you have a Panasonic TV, use the alternate instructions below. FOR ANY TV BRAND EXCEPT PANASONIC: Part 1: Configure the ZVOX system 1. Power on your ZVOX system. 2.
PAGE 5
Comcast DVR 3-Device Universal Remote Control These instructions describe how to configure your Comcast cable remote to control the volume from your ZVOX Audio system and not from your TV. The following instructions apply to any TV brand except Panasonic. If you have a Panasonic TV, use the alternate instructions below. FOR ANY TV BRAND EXCEPT PANASONIC: Part 1: Configure the ZVOX system 1. Power on your ZVOX system. 2.
PAGE 6
Instructions for programming your 4-device FIOS remote to work with a ZVOX SoundBase system (RC1445302) Please note: This page describes the FIOS 4-device remote (with DVD, AUX, TV and STB buttons at the top). The newer, two-device FIOS remote (STB and TV only) cannot be configured to control a separate audio system. If you have a ZVOX Audio system and the 2-device FIOS remote, ZVOX Audio encourages you to replace the 2-device remote with a 4-device FIOS remote.
PAGE 7
AT&T U-verse S10-S2 Remote Control: These instructions describe how to configure your AT&T U-verse remote to control the volume from your ZVOX Audio system and not from your TV. These instructions apply to ZBase 580, ZBase 555 and ZVOX V-Series systems The following instructions apply to any TV. Part 1: Configure your AT&T remote Assign code to the AUX button 1. On the AT&T remote control, press AUX once. 2. Press and hold AUX, then press and hold the OK key then release both keys simultaneously.
PAGE 8
AT&T Silver Remotes Please refer to the image of the black AT&T remote on the previous page for button locations, if necessary. How to configure your AT&T U-Verse SILVER remote to control the volume output of a recent ZVOX Audio system (V220, V320, V420, 555 and 580) Overview: You set the AUX device of the U-Verse remote control to a brand the ZVOX can learn. You teach the ZVOX system to respond to the Volume, Mute (and Power, if desired).