Application Guide

PS Emulation Modes
The rst six options in the PS menu are emulation modes. See “Using the SoundBase remote
control emulation modes” for instructions.
No brand
emulation
Sony LG
There are no PS number choices between PS 6 and PS10.
Samsung
Vizio
Panasonic
Marantz
Additional PS Settings
Additional SoundBase adjustments affect how you turn the SoundBase on and off and how it
responds to remotes
“AS” Auto Standby:
When PS10 is selected, the SoundBase will
automatically enter a low-power draw Standby
mode after 20-30 minutes of very low to no audio
signal. In most uses, this means the SoundBase
will turn its self off after you turn off the TV.
“noAS” no Auto Standby:
When PS11 is selected, the SoundBase will
only enter Standby in response to a press of the
POWER button on the SoundBase remote or
from a “learned” remote control. The SoundBase
will not enter Standby automatically.
“AO” Auto On:
The SoundBase turns on in response to
the Power, Volume and Mute commands
from the SoundBase remote and from
the “learned” remote.
“noAO” no Auto On:
The SoundBase turns on in response to a
SoundBase remote command, but not a
“learned” remote command. Once on, the
SoundBase will respond to a “learned” remote.
“OnEr” One Remote:
The SoundBase responds to just the
SoundBase remote control. Any “learned”
remote response is disabled. Choosing PS12
or PS13 restores a “learned” remote’s ability
to control the SoundBase.