User manual

ManualsBrandsZuumMedia ManualsComputer equipmentHE2IR-TX

Model: HE1

HDMI over Single CAT5/6 Extender

User Manual

!!!!!!!!!!!!!

!!!!!!!!!!!!!!

!!!!!!!!!!!!(HE1&TX!Fro n t / B a c k )! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !!!!!!!!!!!!!!!!!(HE1&RX!Front/ Back)!

! !

Made in Taiwan

ZM 100510

Summary of content (12 pages)

PAGE 1
Model: HE1 HDMI over Single CAT5/6 Extender User Manual (HE1-TX Front/Back)
PAGE 2
SAFETY AND NOTICE The HE1 HDMI over Single CAT5/6 Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the HE1 should be used with care.
PAGE 3
INTRODUCTION The HE1 HDMI over Single CAT5/6 Extender boosts up your video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth.
PAGE 4
SPECIFICATIONS & PACKAGE CONTENTS Model Name Technical Role of usage HDMI compliance HDCP compliance Video bandwidth Video support HDMI over UTP transmission [8-‐bit] Audio support Equalization Input TMDS signal Input DDC signal ESD protection PCB stack-‐up Input Output HE2 HE2-‐TX HE2-‐RX Transmitter [TX] Receiver [RX] No IR remot
PAGE 5
FEATURES  State-‐of-‐the-‐art Silicon Image (founder of HDMI) chipset embedded for utmost compatibility and reliability  Extend the transmission length up to 60m (200ft) from the HDMI sources under HD resolution (1080i or 720p at 8 bit color depth)  Extend the transmission length up to 40m (130ft) from the HDMI sources under Fu
PAGE 6
PANEL DESCRIPTIONS HE1-TX (Transmitter) Input Panel HDMI IN: Connects to a HDMI source with a HDMI male-‐male cable here MODE: 0 = [Video] – supports up to HDMI 3D output. [Audio] – supports up to 7.1ch output 1 = [Video] – supports up to HDMI 3D output.
PAGE 7
Note 2. For desirable 1080p video output, please follow the instructions below: Step 1 – Please set the rotary arrow on TX at “Mode 6” for Default Mode, and wait for the LED of the RJ45 connector to blink for a couple seconds. Step 2 – Please turn the rotary arrow clockwise [ ] from Mode 6 to Mode 1.
PAGE 8
PANEL DESCRIPTIONS CONTINUED HE1-RX (Receiver) Input Panel +5V DC: Connect to a 5V DC power supply unit. HDMI Signal IN: Connect to the HDMI Signal OUT RJ45 port on the transmitter unit HE1-‐TX.
PAGE 9
HARDWARE INSTALLATION 1. Connect your HDMI/DVI source (such as a Blu-‐ray Disc player) to the transmitter unit HE1-‐TX. 2. Connect your HDMI/DVI display (such as a LCD TV) to the receiver unit HE1-‐RX. 3. Connect a Cat-‐5/5e/6 cable between the transmitting and receiving units. 4.
PAGE 10
NOTICE 1. Adjust the 8-‐level signal level equalization control to the received HDMI signals. Dial the Signal Level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issues that would shorten the product’s life significantly! 2.
PAGE 11
RJ-45/CABLE TRANSMISSION DIAGRAMS Performance Guide for HDMI over CAT5/6 Cable Transmission Performance rating Wiring Shielding Unshielded (UTP) Solid Shielded (STP) Unshielded (UTP) Stranded Shielded (STP) Termination Type of CAT5/6 cable CAT5 CAT5e CAT6             Please
PAGE 12
Do You Need Technical Support? ZuumMedia is proud to offer free technical support to ensure your product is operating correctly. If you are experiencing difficulties setting up this product, please call us for assistance 1-888-861-7351 or visit www.zuummedia.com for more information. Technical support representatives are available Monday through Friday, 8:00am to 6:00pm (CMT) 6111 Milwee Suite E, Houston Texas 77092 * 1-888-861-7351 * www.zuummedia.