Installation Guide

FV838 Rev. A 10/5/2023
Page 5
Alternate Hardwired Installation (For Hardwired Only)
1.Usingappropriatetools,cuttheREDpowerconnectorfromthe
endofthepowersupplycable.Then,stripbackthewireinsulation
by a minimum of 1/4” to expose the bare wire.
2. Secure the RED wire to the Positive (+) screw terminal and the
BLACK wire to the Negative (-) screw terminal on the HW6.
Connect Hardwired directly to HW6 Power Converter. (Recommended if one to two ush valves are powered by one HW6.)
Optional -MJ Junction Box (Recommended when three or more ush valves utilize one HW6
-HW6
Wires to
Flush Valve
-MJ
18AWG(MIN)
Max Length 40’