Specification Sheet

____________________________
TEMP-GARD III SHOWER UNIT
Z7301-SS-MT
TAG _______
AquaSpec
®
is a registered trademark of Zurn Industries, LLC.
ZURN INDUSTRIES, LLC.
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 5900 ELWIN BUCHANAN DRIVE
♦♦
♦♦
♦ SANFORD NC 27330
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 7900 Goreway Drive Unit 10
♦♦
♦♦
♦ Brampton, Ontario L6T5W6
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
Rev. K Date:12/5/2017
Dwg. No. 92086 Product No. Z7301-SS-MT
ENGINEERING SPECIFICATIONS: ZURN Z7301-SS-MT
Single handle pressure balancing mixing shower unit,
ceramic control cartridge with stainless steel balancing
piston, built in reverse connection capability (To reverse the
hot and cold inlets simply remove cartridge and turn 180
o
),
two service stops / check stops, and adjustable limit stop.
When valve is turned on it must rotate from cold through to
the hot position. All exposed trim and handle are metal with
polished nickel chrome plated surface. The valve is supplied
with the 2.5 GPM chrome plated plastic -S1 shower head
with spray adjustment, arm and flange in chrome plated
finish. The valve body is a four port valve with a tub port plug
included for shower only applications. The valve inlets,
shower and tub outlet are all standard with 1/2" NPT female
thread connections. The 1/2" copper sweat options must be
specified as shown below.
Note: All dimensions are for reference only. Do not use for pre-
plumbing. Parts shown as hidden lines are supplied by
others.
STANDARDS
Tested to meet the following standards for
valves and plumbing fittings:
ASSE Standard No. 1016
ASME A112.18.1 / CSA B125.1
IAPMO
®
Listed
Meets or Exceeds ANSI A117.1M standard
for physically handicapped
Suffix Options (Check/Specify Appropriate Options)


 -S9 Water saver shower head with adjustable spray and
brass ball joint connector, constant flow orifice, 1.5
GPM flow.


 -S10 Water saver shower head with adjustable spray and
brass ball joint connector, constant flow orifice; 1.25
GPM flow.


 -SC Pair of Dual Spring Check Valves


-SSC 1/2" Female Copper Sweat Connections w/ Service
Stops


-ST Sierra Series Decorative Metal Trim


-STN Sierra Series Decorative Metal Trim, in Satin Nickel
Finish


 -VB In-Line Vacuum Breaker


-WF Wall Mounting Flange For Fiberglass or Panel Wall
Installation


 ______ Other


 -A2 Standard 6" shower arm and cast escutcheon.


 -CPVC 1/2" Male NPT by CPVC Female Adaptors, shipped
loose to be installed in the field.


-DV-2P Two-way diverter valve; three-port 1/2" copper sweat.


 -EXT Extension Kit, Extends Valve Out by 1".


 -HW Handwall shower unit, 60" metal hose, standard
handset, supply elbow and flange, 24" slide bar.


 -HW6 Handwall shower unit, 60" metal hose, standard
handset, supply elbow and flange, 24" slide bar and
vacuum breaker.


 -PEX 1/2" Male NPT by Pex Adaptors, shipped loose to be
installed in the field.


-S5 Large brass shower head with spray adjustment,
chrome finish; 2.5 GPM max.


 -S6 Small brass shower head with brass ball joint
connector, spray adjustment, chrome finish; 2.5
GPM max.


-S7 Brass fixed spray shower head with brass ball joint
connector, fixed spray pattern, chrome finish; 2.2
GPM max.