Installation Sheet

ZURN INDUSTRIES, LLC 5900 Elwin Buchanan Drive, Sanford, NC U.S.A. 27330, Ph. 1-800-997-3876, Fax [phone]
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax [phone]
Rev. L Date: 10/29/2018 C.N. No. SAN008373 Prod. | Dwg. No. CF1007
PAGE 4 OF 4
Proper performance is dependent upon licensed, qualied personnel performing regular, periodic testing according to ZURN
specications and prevailing governmental & industry standards and codes and upon following these installation instructions. Failure
to do so releases ZURN of any liability that it might otherwise have with respect to that device. Such failure could also result in an
improperly functioning device.
RK7000-50
CONTROL STEM
REPLACEMENT KIT
ITEM NO.
2 CAP GASKET
11 CONTROL STEM
12 CONTROL PISTON
13 COLD WASHER RETAINER
14 COLD WASHER
15 CONTROL PISTION PLUNGER
16 HOT WASHER
17 WASHER RETAINING SCREW
RK7000-180**
SEAT REPLACEMENT KIT
ITEM NO.
18 COLD SEAT O-RING
19 INT. COLD SEAT O-RING
20 HOT WATER SEAT
21 COLD WATER SEAT
RK7000-18TOOLS**
SEAT REPLACEMENT KIT
ITEM NO.
COLD SEAT TOOL
HOT SEAT TOOL
RK7000-120
CONTROL STEM WASHER
REPLACEMENT KIT
ITEM NO.
2 CAP GASKET
13 COLD WASHER RETAINER
14 COLD WASHER
16 HOT WASHER
17 WASHER RETAINING SCREW
RK7000-50A
SERVICE STOP REPLACEMENT
KIT (2) PER
ITEM NO.
22 VALVE STOP
23 STOP O-RING
24 STOP GASKET
RK7000-50BN
DIVERTER/VOLUME CONTROL
SPINDLE REPLACEMENT KIT
ITEM NO.
27A DIVERTER SPINDLE (WHITE
W/ BLACK GASKET)
28 O-RING
29 DIVERTER KEY
RK7000-50C
VOLUME CONTROL SPINDLE
REPLACEMENT KIT
ITEM NO.
27B DIVERTER SPINDLE (BLACK)
28 O-RING
29 DIVERTER KEY
RK7000-100
PACKING REPLACEMENT KIT
ITEM NO.
2 CAP GASKET
4 O-RING WASHER
5 O-RING
6 PACKING WASHER
7 GRAPHITE PACKING
RK7000-110
ADJUSTMENT SCREW
REPLACEMENT KIT
ITEM NO.
8 ADJUSTMENT SCREW
9 O-RING
RK7000-200
CAP REPLACEMENT KIT
ITEM NO.
2 CAP GASKET
3 BONNET
4 O-RING WASHER
5 O-RING
6 PACKING WASHER
7 GRAPHITE PACKING
8 ADJUSTMENT SCREW
9 ADJUSTMENT SCREW O-RING
10 PACKING NUT
1 BODY
2 CAP GASKET
3 BONNET
4 O-RING WASHER
5 O-RING
6 PACKING WASHER
7 GRAPHITE PACKING
8 ADJUSTMENT SCREW
9 ADJUSTMENT SCREW O-RING
10 PACKING NUT
11 CONTROL STEM
12 CONTROL PISTON
13 COLD WASHER RETAINER
14 COLD WASHER
15 CONTROL SPINDLE PLUNGER
16 HOT WASHER
17 WASHER RETAINER SCREW
18 COLD SEAT O-RING
19 INT. COLD SEAT O-RING
20 HOT WATER SEAT
21 COLD WATER SEAT
22 SERVICE STOP SPINDLE
PARTS:
23 SERVICE STOP O-RING
24 STOP GASKET
25 STOP RETAINER(7000-3D)
26 RETAINER SCREW(7000-11D)
27A DIV/VOL CONTROL SPINDLE
27B VOLUME CONTROL SPINDLE
28 DIVERTER SPINDLE O-RING
29 DIVERTER KEY
30 DIVERTER RETAINER(7000-3)
31A COVER, ABS(7000-8)
31B COVER, BRASS(7000-8MT)
32A DIAL, STANDARD(T7000)
32B DIAL, DIV/VOL CONTROL(T7001)
32C DIAL, VOLUME CONTROL(T7001A)
33 DIVERTER HANDLE(7000-6C)
34 CLIP(7000-32)
35 COVER SCREW(7000-11AB)
36A ESCUTCHEON, ABS(7000-81)
36B ESCUTCHEON, BRASS(7000-
81MT)
37 ESCUTCHEON NUT(7500-9)
38 TEMPERATURE HANDLE, METAL
39 HANDLE SETSCREW(7000-11G)
40 COVER GASKET
(SEE COVER GASKET
INSTALLATION)
Z7000-LH
HANDLE ASSEMBLY
ITEM NO.
38 TEMP HANDLE, METAL
39 HANDLE SET SCREW
(7000-11G)
**REQUIRES RK7000-18TOOLS TO REPLACE SEATS
Replacement Kits