Use and Care Manual

Zurn Plumbing Products Group Commercial Brass and Fixtures Operation
2640 South Work Street · Falconer, NY 14733 · Phone: [phone] · Fax: [phone] · www.zurn.com
REV. A DWG. NO. 82559 DATE: 7/16/10 C.N. NO. 111395 PRODUCT NO. Z5360
TAG
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when lavatory is installed 34”
[864mm] from finished floor.
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2-2003 and
CAN/CSA B45 requirements.
Rough-in dimensions for Z5360 Series
• Z5361 Lavatory with single faucet hole
• Z5364 Lavatory with 4" center faucet holes
• Z5368 Lavatory with 8" center faucet holes
Note: Rough-in for concealed arm carrier, see Zurn Z1231
Rough-in sheet.
14
1
2
[368]
(Pop-Up Drain)
12
3
4
[324]
10 [254]
4 [103]
18
1
4
[464]
8 [203]
4 [102]
21
1
2
[546]
16
1
2
[418]
20 [508]
7
1
2
[190]
3
1
8
[79]
5
1
4
[133]
3
1
4
[83]
5
1
4
[133]
10
1
4
[260]
18
1
4
[464]
9 [229] MIN.
6 [152]
MAX.
8 [203]
MIN.
Z1 BRACKET
1
1
8
[29]
7
3
4
[197]
4 [102]
1
8
[3]
2X SCALE
7
1
2
[190]
ADA
CLEARANCE
17 [432]
1
1
2
[37]
33
3
8
[848]
32
1
2
[827]
34 [864] (ADA)
31 [787]
8 [203]
27 [686]
MIN.
FINISHED
FLOOR
Z5360
20” x 18” High Back
Wall Hung Lavatory
Rough-In