Use and Care Manual

Model: Z.L6.M
20” x 18” Wall Hung Lavatory
Zurn One Manual Hand Washing System
TAG ____________
US 1.855.ONE.ZURN CANADA 1.905.405.8272 ZURN.COM
ZURN INDUSTRIES, LLC 511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax [phone]
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax [phone]
Rev. A Date:
09/03/19 C.N. No. NEW Prod. | Dwg. No. SS Z.L6.M
Faucet - Complies with ASME A112.18.1 / CSA B125.1
Meets the American Disabilities Guidelines and ANSI A117.1 requirements
when installed according to these requirements.
Fixture - Complies with ASME A119.2 / CSA B45.1
This system complies with the Buy American Act: Fixture manufactured in
China; Faucet manufactured in US with US and foreign parts.
Architectural/Engineering Approval
The information contained in this document is subject to change without notice.
Please contact Zurn for most up to date information.
Architectural/Engineering Specication:
Complete manual hand washing system includes 20”x18”
vitreous china wall hung lavatory with Z812B1-XL-3F polished
chrome centerset 3-1/2” gooseneck faucet with lever handles,
Z8743-PC chrome plated cast brass solid top grid strainer,
Z8700-8B-PC series P-trap, and Z8804-XL-LR-LK-PC series
supply stop kit.
Zurn One System Packout Includes:
Lavatory - Z5344:
20” x 18” vitreous china wall hung lavatory with 4” center
faucet holes. Provided with hanger plate and holes for
concealed arm carrier systems.
Z812B1-XL-3F:
Polished chrome-plated cast brass faucet body with
integral shanks, quarter turn ceramic disc cartridges and a
5-3/8” centerline rigid or swing gooseneck spout with a 0.5
gpm vandal-resistant pressure compensation spray outlet.
Grid Drain - Z8743-PC:
Chrome plated cast brass solid top, open grid, P.O. plug.
Furnished with 5” long, chrome plated brass 17 gauge
tailpiece and chrome plated cast brass locknut.
P-trap w/ Wall bend - Z8700-8B-PC :
Chrome-plated cast body 1 ¼” P-trap with cleanout,
tubular wall bend, brass nuts and shallow escutcheon with
compression inlet.
Lavatory Supply Stops - Z8804-XL-LR-LK-PC:
Chrome plated solid brass angle stop with ½” NOM
compression inlet, 3/8” OD compression outlet, loose key,
chrome plated copper riser tubes and chrome plated inlet
anges.
Product Features:
• 20” [508 mm] x 18” [457 mm] vitreous china lavatory
• Wall hung lavatory provided with wall hanger bracket
or for use with concealed arm carrier systems
• Front overow
• Chrome-plated Cast Brass faucet body
• Quarter turn ceramic disk faucet operation
• 3 /12” centerline rigid or swing gooseneck spout
• 2-1/2” lever handles
• Complete commercial grade grid drain, P-Trap, supply
stops and supply kit.
Compliance and Certication: