Specification

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice
SPECIFICATION SHEET
TAG _______
* Regularly furnished unless otherwise specified.
Zurn Industries, LLC
| Zurn PEX, Inc.
116 Maple Street, Commerce, TX U.S.A. 75429 · Ph. 800-872-7277, Fax [phone]
Zurn Industries, LLC | Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax [phone]
www.zurn.com
Rev. A
Date: 06/22/16
C.N. No. 134666
Prod. | Dwg. No. LD QQPT_X
LD QQPT_X
LARGE DIAMETER Qick Sert CR
®
BARB X BARB X
BARB TEE
Engineering Specification: Zurn PEX
®
Qick Sert CR® tee.
The QQPT___X tee is used to branch off a main line or change direction. Molded from Radel
®
. These fittings, as a system
with Zurn PEX tube are pressure rated at 160 PSI [1103 kPa] at 73.3°F [22.9°C], 100 PSI [689 kPa] at 180°F [82.2°C], and
80 PSI [552 kPa] at 200°F [93.3°C]. These fittings are listed by NSF as complying with the following standards: NSF/ANSI
Standard 14, NSF/ANSI Standard 61, NSF/ANSI Standard 372, ASTM F877 and CSA B137.5.
Accessories
___ QCR4X ¾ [19] Copper Crimp Ring
___ QCR5X 1 [25] Copper Crimp Ring
___ QCR6X 1-¼ [32] Copper Crimp Ring
___ QCR7X 1-½ [38] Copper Crimp Ring
___ QCR8X 2 [51] Copper Crimp Ring
___ QCR4XPC ¾ [19] QickCap® Copper Ring w/ Positioning Cap
___ QCR5XPC 1 [25] QickCap® Copper Ring w/ Positioning Cap
___ QCR6XPC 1-¼ [32] QickCap® Copper Ring w/ Positioning Cap
___ QCR7XPC 1-½ [38] QickCap® Copper Ring w/ Positioning Cap
___ QCR8XPC 2 [51] QickCap® Copper Ring w/ Positioning Cap
___ QGA678CR Go-Go Gauge for Large Diameter CR Fittings
___ QCRTLDM Large Diameter Compact Crimp Tool
___ QCRBKIT56-14 14V Battery-Powered Crimp Tool Kit (1 [25], 1-¼ [32])
___ QBJ6 1-¼ [32] Crimp Head
___ QBJ7 1-½ [38] Crimp Head
___ QBJ8 2 [51] Crimp Head
A B
C
D
E
F
A B C D E F
in [m m ] in [m m ] in [m m ] in [m m ] in [m m ] in [m m ]
Q Q P T664X
1-1/4 [32] barb x 1-1 /4 [3 2] ba rb x 3/4 [19] barb te e 1.045 [26.5] 1.045 [26.5] 0.668 [17.0 ] 1.500 [38.1] 1.973 [50.1] 3.900 [99.1]
Q Q P T665X
1-1/4 [32] barb x 1-1 /4 [3 2] ba rb x 1 [25] barb tee 1.045 [26.5] 1.045 [26.5] 0.856 [21.7 ] 1.500 [38.1] 2.123 [53.9] 3.900 [99.1]
Q Q P T666X
1-1/4 [32] barb x 1-1 /4 [3 2] ba rb x 1-1/4 [32] barb tee 1.045 [26.5] 1.045 [26.5] 1.045 [26.5 ] 1.500 [38.1] 2.473 [62.8] 3.900 [99.1]
Q Q P T774X
1-1/2 [38] barb x 1-1 /2 [3 8] ba rb x 3/4 [19] barb te e 1.233 [31.3] 1.233 [31.3] 0.668 [17.0 ] 1.004 [25.5] 2.167 [55.0] 3.400 [86.4]
Q Q P T775X
1-1/2 [38] barb x 1-1 /2 [3 8] ba rb x 1 [25] barb tee 1.233 [31.3] 1.233 [31.3] 0.856 [21.7 ] 1.256 [31.9] 2.317 [58.9] 3.660 [93.0]
Q Q P T777X
1-1/2 [38] barb x 1-1 /2 [3 8] ba rb x 1-1/2 [38] barb tee 1.233 [31.3] 1.233 [31.3] 1.233 [31.3 ] 1.700 [43.2] 2.667 [67.7] 4.100 [104.1 ]
Q Q P T884X
2 [51] barb x 2 [51] barb x 3/4 [19] ba rb tee 1.602 [40.7] 1.602 [40.7] 0.668 [17.0 ] 1.004 [25.5] 2.601 [66.1] 4.004 [101.7 ]
Q Q P T885X
2 [51] barb x 2 [51] barb x 1 [25] barb tee 1.602 [40.7] 1.602 [40.7] 0.856 [21.7] 1.256 [31.9] 2.751 [69.9] 4.255 [108.1 ]
Q Q P T888X
2 [51] barb x 2 [51] barb x 2 [51] barb tee 1.602 [40.7] 1.602 [40.7] 1.602 [40.7] 2.200 [55.9] 3.401 [86.4] 5.200 [132.1 ]
P art Num ber D es criptio n