Submittal Sheet

Large Diameter Compact Crimp Tool - QCRTLDM
Specification Sheet
Tag ____________
Rev. Date: 10/15/10 C.N. No.111864
Dwg. No. 302928 Prod. No. QCRTLDM
Engineering Specification: Zurn PEX
®
Large Diameter Com-
pact Crimp Tool. The QCRTLDM tool is intended for use with 1-1/
4", 1-1/2", and 2" Zurn PEX copper crimp rings on Zurn PEX DZR
and Zurn PEX XL insert fittings meeting the requirements of ASTM
1807. Tool is used in conjuction with either a pneamatic, elec-
tric, or battery operated impact wrench to make a connection.
Accessories
___ QCR6X 1-1/4" Copper Crimp Ring
___ QCR7X 1-1/2" Copper Crimp Ring
___ QCR8X 2" Copper Crimp Ring
Dimensional Data: Inches and [mm] are subject to manufacturing tolerances and change without notice.
ZURN PEXZURN PEX
ZURN PEXZURN PEX
ZURN PEX
®®
®®
®
PLUMBING PLUMBING
PLUMBING PLUMBING
PLUMBING
AND RADIANT HEAAND RADIANT HEA
AND RADIANT HEAAND RADIANT HEA
AND RADIANT HEA
TING SYSTEMSTING SYSTEMS
TING SYSTEMSTING SYSTEMS
TING SYSTEMS HWY 11 EAST, COMMERCE, TX, U.S.A. 75429 PHONE: [phone] FAX: [phone] WEBSITE: www.zurnpex.com
IN CANADA: ZURN INDUSTRIES LIMITED 3544 NASHUA DRIVE, MISSISSAUGA, ONTARIO L4V 1L2 PHONE: [phone] FAX: [phone]
14.25" [362.0]
6.125" [156.2]
Also included, but not shown:
Crimping Jaws: 1-1/4", 1-1/2", and 2"
Socket
Allen Wrench
"Go Gauge"
Replacement Parts
Case