Specification

Page 1 of 2
Rev. J
Date: 8/20
Document No. BF-950XLT2
Product No. Model 950XLT2
Model 950XLT2
Top Access Double Check Valve Assembly
Zurn Industries, LLC | Wilkins
1747 Commerce Way, Paso Robles, CA U.S.A. 93446 Ph. 855-663-9876, Fax [phone]
In Canada | Zurn Industries Limited
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, 877-892-5216
www.zurn.com
C
F
D
B
A
G
E
OPTIONAL LEAD-FREE STRAINER
(MODEL SXL)
950XLT2
WILKINS
175 PSI
180˚F
DC
WILKINS
XL
Features
Sizes: 3/4", 1", 1 1/4", 1 1/2", 2"
Maximum working water pressure 175 PSI
Maximum working water temperature 180°F
Hydrostatic test pressure 350 PSI
End connections Threaded ANSI B1.20.1
Options (Suffixes can be combined)
 FT - with "Fast Test" test cocks
 S - with Model SXL lead-free bronze "Y" type
strainer
Accessories
 Repair kit (rubber only)
 Thermal expansion tank (Model XT)
 QT-SET Quick Test Fitting Set
Application
Ideal for use where Lead-Free* valves are required. Designed
for installation on potable water lines to protect against both
backsiphonage and backpressure of polluted water into the
potable water supply. A test cock plug is provided to protect
against fouling caused by insects, dirt and debris. Assembly
shall provide protection where a potential non-health hazard
exists.
Standards Compliance
• (Unless otherwise noted, applies to 3/4" thru 2" Horizontal)
• ASSE® Listed 1015 (Vertical flow-up:1 1/4" thru 2")
• IAPMO® Listed
• CSA® Certified (Vertical flow-up:1 1/2" & 2")
• AWWA Compliant C510
• Approved by the Foundation for Cross Connection Control
and Hydraulic Research at the University of Southern
California
• Meets the requirements of NSF/ANSI/CAN 61
*(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)
Materials
Main valve body Low Lead Cast Bronze ASTM B 584
Access covers Low Lead Cast Bronze ASTM B 584
Fasteners Stainless Steel, 300 Series
Elastomers Silicone
Buna Nitrile
Polymers Noryl™
Springs Stainless steel, 300 series
Test cock cover Plastic
Ball valve handles Stainless steel
MODEL SIZE
DIMENSIONS (approximate)
A
B
C D E F G
WITH
BALL
VALVES
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg
3/4 20 13 330 8 3/4 222 2 3/8 60 2 5/16 59 3 5/16 84 3/4 19 17 5/8 448 6 2.7
1 25 14 356 8 3/4 222 2 1/2 64 2 5/16 59 3 5/16 84 3/4 19 19 3/4 502 12 5.4
1 1/4 32 19 5/8 499 13 3/4 349 4 102 3 5/8 92 4 3/8 111 1 5/16 33 24 3/4 629 22 10
1 1/2 40 20 5/16 516 13 3/4 349 5 3/8 137 3 5/8 92 4 3/8 111 1 5/16 33 25 15/16 659 22 10
2 50 21 3/8 543 13 3/4 349 5 13/16 148 3 5/8 92 4 3/8 111 1 5/16 33 28 5/16 719 29 13.2
NSF/ANSI/CAN 61
Dimensions & Weights (do not include pkg.)