Warranty

Terms and Conditions
Shortage/Damage Claims
Notification of material shortages or incorrect filling of orders must be made to Zurn within 10 days of receipt. No claims over three months old
will be honored. Buyer agrees to make all complaints for damage in transit or “short count” directly to the carrier; before the contents are
unloaded have the carrier agent’s acknowledgement of such damage noted on the bill of lading and to present to the carrier its agent’s
acknowledgement of such damaged material with formal claim covering said damage.
General
Zurn reserves the right to make changes in design or equipment of any item or product without incurring any obligation on previously sold
items, and to discontinue items at any time, without notice. Possession of this Catalog or other sales literature is not to be construed as an
offer to sell. All orders are subject to acceptance by Zurn . Catalog printed in U.S.A.
Zurn flush valves are designed to comply with Army Corp of Engineers and Naval guide specifications, Military Specification MIL.V.29193 and
Federal Specification WWP541.
Zurn flush valves comply with the following standards: ASME A112.18.1/CSA B125.1, A112.19.5, A112.19.2, A112.19.6, ASSE 1037 and 101
are listed by the following agencies: Canadian Standards, IAPMO/UPC/CUPC, and CSA 125.3. Zurn flush valves are manufactured from
dezincification resistant alloys. For additional compliances, contact Zurn Industries, LLC, Commercial Brass Operation, or 1-800-997-3876.
Zurn is not responsible for typographical errors. The contents of this guide are subject to revision without notice.
©2014 Zurn Industries, LLC Items in this Guide are covered by Patents and Patents Pending. Registered Trademarks.
ZURN INDUSTRIES, LLC
1801 PITTSBURGH AVENUE, ERIE, PA, U.S.A. 16502 PHONE: 855-ONE-ZURN (855-663-9876) FAX: [phone] www.zurn.com