Warranty

GENERAL TERMS AND CONDITIONS
PRICE AND TERMS OF PAYMENT
Terms are net, payable 30 days from date of invoice. All pricing in U.S.
currency. The Buyer shall pay all sales, consumers, or other applicable
taxes. A 1-1/2% monthly (18% annual) service charge will be added to the
outstanding balance of all past due invoices.
Minimum invoice $100.00. Zurn Industries, LLC ("Zurn") reserves the right
to apply a minimum order charge in order to meet the $100.00 minimum
invoice requirement. All orders are subject to credit approval by the Zurn
Credit Department prior to the acceptance of an order. Orders may be
refused, delivery may be withheld, or shipment stopped in transit without
any liability on Zurn's part at Zurn's sole discretion based upon Buyer's credit
worthiness as determined by Zurn.
FREIGHT
Zurn is pleased to provide an industry-leading $3,500 combined freight
rate. Please see below for specific policy details.
All sales are F.O.B. seller's location. Zurn will allow full freight allowance
when any of the following conditions are met: 1) any combination of
Specification Drainage, Light Commercial, Commercial Brass or Wilkins
orders of $3,500 or more; 2) Linear Drainage and Chemical Drainage orders
of $5,000 or more; 3) any Combination of Specification Drainage, Light
Commercial, Commercial Brass, Wilkins, Linear Drainage and Chemical
Drainage orders of $5,000 or more; 4) Zurn One Systems orders of $7,500
or more; 5) fixture only orders totaling $10,000 or more. This full freight
allowance applies when the shipment is within the continental United
States and has a single destination of a buyer's standard address or job
location. Routing of shipment shall be determined at the sole direction of
Zurn. Shipping dates are estimates and time of delivery shall not be of the
essence of this sale contract. Under no circumstances will the Seller have
any responsibility on account of any delays in manufacture, transportation,
or otherwise. Terms of Export Shipment on application.
NOTE: Any product dimension larger than 92. or any single item weighing
more than 3,500 lbs., shall be defined as an oversized and/or overweight
product and Zurn's standard FFA terms may not apply. Please contact our
customer service department for guidance on potential additional shipping
charges.
These charges and restrictions apply in addition to Zurn standard terms and
conditions for sale unless otherwise agreed upon by the parties.
LIMITED WARRANTY
Zurn goods sold hereunder are warranted to be free from defects in material
and factory workmanship for the period of time from the date of purchase:
AquaVantage® Flush Valves, AquaFlush® Flush Valves, Commercial Fixtures,
Faucets, Showers, and Tubular Brass: three years; Chemical Drainage, Linear
Drainage, Light Commercial, Specification Drainage, Zurn Wilkins, and Flush
Valve and Tubular Brass decorative finishes: one year, PHIX® Cartridge ten
years, FOG-ceptor™: thirty years. Where permitted by law,
THE IMPLIED
WARRANTY OF MERCHANTABILITY IS LIMITED TO THE ABOVE
IDENTIFIED PERIOD OF TIME AND SHALL BE LIMITED SOLELY TO
THE REPLACEMENT OF THE DEFECTIVE GOODS. A damaged/broken
test cock or ball valve is not considered defective. Please contact Zurn
Customer Care for assistance.
Zurn will replace goods at no cost that prove defective provided Zurn is
notified in writing of such defect and the goods are returned prepaid at
the specified Zurn location with evidence that they have been properly
maintained and used in accordance with instructions.
ZURN SHALL
NOT BE RESPONSIBLE FOR ANY LABOR CHARGES OR ANY LOSS,
INJURY, OR DAMAGES WHATSOEVER, INCLUDING, BUT NOT
LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES. The sole
and exclusive remedy shall be limited to the replacement of the defective
goods. Before installation and use, the purchaser shall determine the
suitability of the product for his intended use and the purchaser assumes all
risk and liability whatever in the connection therewith. All weights stated in
Zurn catalogs and lists are approximate and are not guaranteed.
RETURNED GOODS
Standard cataloged material may be returned only with written permission
of Zurn. Returned goods are subject to a 25% restocking charge of total
saleable material returned, plus cost of reconditioning, if necessary, to
make material sellable. Transportation charges are the responsibility of the
Buyer. Credit allowance will be in the form of merchandise credit only – not
cash credit. The value of the return must total at least $100.00 to qualify
for credit allowance. No credit will be allowed for parts unless originally
ordered and invoiced as parts. No credit will be allowed for discontinued or
made-to-order items. Items that have been specially made are not subject
to return or cancellation except by special negotiation. Material must be
returned within one year of invoice date for credit to be issued for Chemical
Drainage, Linear Drainage, and Light Commercial. Material must be returned
within two years of invoice date for credit to be issued for Commercial
Fixtures, Flush Valve Products, Specification Drainage, Tubular Brass,
and Zurn Wilkins. No credit is allowed for Linear Drainage products that
have been cut and Specification Drainage product with auxiliary tappings.
Flush Valve material over two years old will be subject to a 50% handling
charge. Flush Valve material over five years old will not be accepted. Light
Commercial and Specification Drainage galvanized material will be credited
at value of Dura-Coated cast iron, and chrome plated at value of bronze.
Zurn Wilkins damaged/broken test cocks or ball valves are not considered
defective.
ILLUSTRATIONS OF TYPICAL INSTALLATIONS
The typical installations for various products found in each product section
are intended to illustrate the products and potential options for the use
of these products. Under no circumstances are they to be construed as
recommended installation procedures. Consult local codes and project
specifications for proper installation instructions.
SHORTAGE/DAMAGE CLAIMS
Notification of material shortages or incorrect filling of orders must be made
to Zurn within 10 days of receipt. No claims over three months old will be
honored. Buyer agrees to make all complaints for damage in transit or "short
count" directly to the carrier; before the contents are unloaded have the
carrier agent's acknowledgment of such damage noted on the bill of lading
and to present to the carrier its agent's acknowledgment of such damaged
material with formal claim covering said damage.
GENERAL
Zurn reserves the right to make changes in design or equipment of any item
or product without incurring any obligation on previously sold items, and to
discontinue items at any time, without notice. Possession of this Catalog or
other sales literature is not to be construed as an oer to sell. All orders are
subject to acceptance by Zurn . Catalog printed in U.S.A.
Zurn flush valves are designed to comply with Army Corp of Engineers and
Naval guide specifications, Military Specification MIL.V.29193 and Federal
Specification WWP541.
Zurn flush valves comply with the following standards: ASME A112.18.1/CSA
B125.1, A112.19.5, A112.19.2, A112.19.6, ASSE 1037 and 101 are listed by the
following agencies: Canadian Standards, IAPMO/UPC/CUPC, and CSA 125.3.
Zurn flush valves are manufactured from dezincification resistant alloys.
For additional compliances, contact Zurn Industries, LLC, Commercial Brass
Operation, or 1-800-997-3876.
Zurn is not responsible for typographical errors. The contents of this guide
are subject to revision without notice.
© 2017 Zurn Industries, LLC Items in this Guide are covered by
Patents and Patents Pending. Registered Trademarks.
2