ZuniDigital Desktop Wireless Router AP Mode User’s Guide ZGR304 Page | 1
Table of Contents Introduction…..2 Retail Package Contents…..2 Safety Information…..2 Product Overview…..3 Features…..3 Setup Instructions Router Mode…..4 AP Mode….9 Troubleshooting Information…..10 Specifications…..11 Warranty Information…..12 FCC Certification Information…..13 Introduction Congratulations on your purchase of the ZuniConnect ZGR304 Wireless Router. Before installing and using this innovative product, please read this user’s guide thoroughly, and retain it for future use.
Product Overview 300 Mbps WiFi Router/AP (Access Point) + 4-Port Gigabit Switch We continue to amaze our customers by including so many features in a case one third the size of most of our competitors. IPv6 compatible, WPS 2.0, enhanced security, multiple power options, Wireless N up to 300 Mbps; all in a sleek stealth design.
Setup Instructions ROUTER MODE For this mode the ZuniDigital ZGR304 uses a wired Broadband connection as the WAN (Internet) connection, to create a new personal network that can then be shared booth via Wi-Fi and the four LAN ports. For the best results do not place the ZGR304 near any large metal objects or magnets (like those found in speakers). Also note that elevating the router from the floor will increase wireless broadcast signal performance and range.
Step 2 - Attach Power Cable If you are using the AC adapter, plug it into a wall socket and plug the power tip into the ZGR304’s 5v power port. If you are using a USB cable, you can provide power to the router from any electronic device with a USB port (device must be on to power the router). Please wait 30 seconds for the router to fully boot up before continuing to the next step. Step 3 - Access Web Configuration From your computer, open a Web browser (Internet Explorer, Firefox, Safari, etc.
Step 5 – Enter the Setup Wizard You can manually set up the unit, but we recommend that users click the “Run Setup Wizard” button on the ZGR304 router’s main page, or from the navigation menu on the left side of the web interface. Step 6 - Begin the Setup Wizard To begin the Setup Wizard click the “Next” button. If you wish to exit the Setup Wizard click the “Cancel” button.
Step 8 - Configure WAN (Internet) Parameters This step lets you configure the router to utilize the broadband signal provided by the Internet provider. The majority of providers use DHCP which is the default setting of the ZuniDigital ZGR304. This setting should work in most locations, but if you have any questions on which settings to use, please contact your Internet Service Provider or your local network administrator.
Step 10 - Apply Wi-Fi Network Security Settings By default, the ZuniDigital ZGR304 broadcasts as an OPEN network with no data encryption. If you wish to enable network encryption to help secure your network, please select the encryption type you want to use, establish a password that you can remember, and then click the “Finished” button. This will finalize the settings for your ZGR304 and you may begin using it as a wireless router.
Access Point MODE TO USE AP MODE, YOU MUST FIRST SETUP THE ZGR304 IN ROUTER MODE By sliding this switch you will switch from router mode to AP mode. In AP mode the ZuniDigital ZGR304 acts as a bridge between your existing wired network and your wireless equipped devices. Once you have set up the ZGR304 in Router mode simply move the switch on the back of the ZGR304 to AP. Step 1 - Attach Ethernet Cable To use AP Mode, you must have a WIRED Broadband connection available.
Troubleshooting Information If You Need Further Assistance You Can Reach Our Product Support Team by Phone Toll-Free At 1(888)213-8529, Or Via Email Support@Zunidigital.Com PROBLEM I cannot connect to the Internet wirelessly using the router, and the ZuniConnect SSID is not available The setup computer cannot access the Web based configuration screen. Wireless network performance is slow.
Product Specifications Operation Modes: ROUTER, WIRELESS ACCESS POINT IEEE Wireless Standards: 802.11N, 802.11G, 802.11B IEEE Wired Standards: 802.3, 802.3u, 802.3x Supports IPv6 pass through and WPS 2.0 User Interface: (4) 10/100/1000 LAN Port, (1) 10/100 WAN Port, ROUTER / AP Switch, WPS Button, Reset Button Wireless Security: 64-Bit / 128-Bit WEP / WPA / WPA2 Encryption Receiver Sensitivity: (802.11N) -68dBm, (802.11G) -73dBm, (802.11B) -89dBm Transmit Power: (802.
Warranty Information: Warranty Statement should our ZGR304 fail to perform within the warranty period, ZuniDigital, Inc. (hereafter “ZuniDigital”) will replace the same or functionally similar product at our discretion, free of charge provided you: 1. 2. Return the product to a ZuniDigital designated facility. Provide us with proof of purchase and the original purchase date. Replacement products will be returned with ground shipping charges paid, and said products may contain refurbished materials.
FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
