F18 User Manual Version: 1.0 Date: Dec. 2011 Introduction: This document mainly introduces the windows and operations of F18 model of 2.4 Inches color TFT products.
About this manual 1. Not all the devices have the function with ★. The real product prevails. 2. The photograph in this manual may be different from that of the real product. The real product prevails. 3. Key functions of various models are different. Please read the key board instruction in appendix firstly. 4.
Contents Contents 1. Operating Instruction ............................................................................. - 1 1.1 Abbreviated Operating Procedures ....................................... - 1 1.2 Introduction to Fingerprint Recognition technology ............ - 2 1.3 About Verification Mode ...................................................... - 3 1.4 Connection with PC ............................................................ - 11 1.5 Main menu ...........................................
Contents 2.4.7 Anti-passback Setting★ .......................................... - 44 3. Communication Option........................................................................ - 47 3.1 Network option ................................................................... - 47 3.2 Serial port option★ ............................................................ - 48 3.3 Security ............................................................................... - 49 3.4 Wiegand option★ ........................
Contents 7.3 Keyboard test ...................................................................... - 70 7.4 Sensor test ........................................................................... - 70 7.5 Real-time clock ................................................................... - 70 8. Query Record ....................................................................................... - 71 9. System Information .............................................................................. - 74 9.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 1. Operating Instruction 1.1 Abbreviated Operating Procedures Step 1: Install the device and power it up. Step 2: Enroll users by registering his/her fingerprints, passwords or card. Assign users’ security privileges directly on the device. Step 3: After enrolling users, verify that his/her enrolled fingerprint, passwords or card is valid. Step 4: Configure the device communication settings.
F18 User Manual V1.0 1.2 Introduction to Fingerprint Recognition technology Enroll fingerprint by pressing index finger, middle finger or ring finger . Proper press: Make finger center pressed on the sensor window Improper press: Upright Too lean Too downward Slant Please adopt the correct way to place the finger to avoid improper operation led to the identification performance degradation.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 1.3 About Verification Mode When the device is on initial interface, only after successful fingerprint or password or Card verification, user can save attendance record on the device. Initial Interface (As shown below): Notice: 1) If the device have ID module, so Interface of Matrix and Magic style can be displayed "Press fingerprint or punch card".
F18 User Manual V1.0 (1) 1:N fingerprint matching Verify the fingerprint pressed on the sensor at present with all fingerprint data in the fingerprint reader. Step 1: Press fingerprint properly on the sensor on initial interface. Step 2: If device says ‘Thank you”, the verification is completed. If device says “Please press again”, and displayed "Verify fail" on the screen. Return Step 1 for the second operation.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. (2) 1:1 fingerprint match（User ID＋fingerprint) Verify the fingerprint pressed on the sensor at present with the fingerprint related with user number. Use this method when it is difficult to identify user’s fingerprint. Step 1: Input User ID of employee to be verified on initial interface. Step 2: Press fingerprint properly on the sensor.
F18 User Manual V1.0 Step 3: If device says ‘Thank you”, the verification is completed. Notice: If device says “Please press again”, return Step 2 for the second operation.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. If device says “Error ID”, that means you input ID number is wrong, please return Step 1 for the second operation. Password Matching Step 1: Input User ID of employee to be verified on initial interface. Then press OK. Step 2: If it says that the enroll number is wrong, it means that there is no such number or the employee does not enroll password.
F18 User Manual V1.0 Step3: Input password when the interface appears. Step 4: If device says ‘Thank you”, the verification is completed.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
F18 User Manual V1.0 Please return Step 3 input password again for the second operation. Ranges of the input password time is 0~9. Employee can set default time what you want. For details please refer to 4.4 Display Setting. Card Matching ★ The card area is round the keyboard. Step 1: Wave the card near the induction area on initial interface, after the induction equipment finding the card, please remove the card. Step 2: When the equipment gives the tip "Thank you", the certification completed.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Step 3: If the card has not registered yet, prompt that card is not registered. 1.4 Connection with PC The device only records attendance time. The statement can be disposed by software on PC. Therefore, it is necessary for device to connect PC to download attendance record to attendance software.
F18 User Manual V1.0 Subnet mask: Default subnet mask as 255.255.255.0. You can modify it if it is necessary. Gateway address: Default gateway address0.0.0.0. You can modify it if it is necessary. Network speed: There are three options: ATUO, 10M, and 100M. Connection password: Set it in “Menu－Communication option－ Security”. It can be set or not. If it is set, input corresponding numerical value on connection interface of PC software. RS232: Use RS232 serial port wire for connection.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. is set, input corresponding numerical value on connection interface of PC software. USB Set device: Enter Menu－Communication option to set the following items: Device ID: Set it in “Security”. It can be set from 1－254. USB: Set it in “RS232/485”.Select “Yes” for USB communication. Communication password: Set it in “Security”. It can be set or not.
F18 User Manual V1.0 Communication: Set up communication parameters between the equipment and the PC, including IP address, gateway, subnet mask, baud rate, device number, communications password etc. System: Manage the data and set the system parameters, including basic parameters, interface parameters, fingerprint and attendance parameters, to maximize meet user’s needs in the functional, display and other areas. Date/Time: Device time date should set accurate to ensure the accurate attendance time.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2. User Management The user’s basic information on the device includes fingerprint, password and management access. In company’s attendance management, for employee’s change, the information on the device also needs modification. Therefore, operations including “add, delete, check, modify and so on” can be done on the device. 2.1 Add user Firstly, enroll employee’s fingerprint or password in the device.
F18 User Manual V1.0 Notice: Only some models have name and card options. ID.NO: Staff's attendance number. FP (Fingerprint): enroll employee’s fingerprint. Ten fingerprints can be enrolled at most. The employee with fingerprint enrolled can use fingerprint to record attendance. PWD (Enroll password): enroll user’s password. The effective digit is 1～8. The employee with password enrolled can use password to record attendance.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. may entry the menu operation; after the manager is appointed, anyone is unable to entry the menu until the manager status is confirmed, after the success can entry the menu： For example: the following is the flow for add user. Input User ID 1) Allocate User ID by default. 2) Press “ ” to delete the allocated User ID by default. Input User ID from keyboard. If the User ID is wrong, press “ ” to input it again.
F18 User Manual V1.0 Enroll password Input password (1～8) according to device’s prompt, and press OK to verify it. Then press OK save it or press ESC to exit without saving it. After saving, display will be on the device, which means the password has been set.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. number will display on the register button. Privilege setting Scroll the▲/▼ key and local cursor on the "Privilege" option box, scroll / key to choose privilege. Save/exit user registration To confirm the registration information is correct, after getting confirmation, save it.
F18 User Manual V1.0 Notice:1) means this employee is the administrator. means password has been enrolled. means ID Card has been enrolled. 2) The picture may be different from your device. The real product prevails. Press menu on the above interface, and the operating menu will pop out: Press ▲/▼ to select the item.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2.2.1 Search user If many users are enrolled, in order to find an employee quickly, the device has provided “User ID” to search the employee. Press menu on manage user interface to get operating menu. Select “Search user” or press any numeric key to enter the following page: Input User ID of employee to be queried. Press OK, after successful query, the blue cursor will point to the employee.
F18 User Manual V1.0 Notice: The picture may be different from your device. The real product prevails. Press ▲/▼ to read attendance record. Press OK/menu to query detailed information. Then press “ESC” to return to manage user interface. 2.2.3 Edit user Edit user information saved in the device.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. fingerprint, password or card. Use ▲/▼ or query user on manage user interface to select employee to be edited. Then press menu to select “edit” or press shortcut to verify it, and all enrolled information can be displayed on the device: Notice: Only some models have name and card options. User ID cannot be modified. The operation is similar to that of add user. Fingerprint can be re-enrolled.
F18 User Manual V1.0 2.2.4 Delete user “Del user” is to delete employee’s partial information or all information from the device. It is used when the following states happen: 1) When employee’s fingerprint or password is not needed any more. 2) When employee leaves the position. Press ▲/▼ on manage user interface or use query user to select the employee to be edited. Click menu to get operating menu, and then select “delete user”. Delete user Notice: Only some models have Del ID Card Only options.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2.2.5 Add user In order to add user conveniently for operator, add user is configured here. The function is the same as that of 2.1 add user. 2.3 Card management★ Support Mifare non-touch intelligent card with working frequency of 13.56MHZ. Integrate fingerprint attendance to other systems and support multi-verification mode to meet the demands of different people.
F18 User Manual V1.0 1. Enrollment Step 1: Select enroll card and then press OK. Step 2: press keyboard to input the number to be enrolled（if the number has been there already, the device will prompt you to copy the information to the card.), and then press OK. Step 3: The device prompts to show card. Step 4: Put the card in the induction area until the operation is successful. 2.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Sway the card in the induction area. After the device inducts the card, move the card off. When the verification is successful, the device will give prompt. Tips: Please enter user access control option to modify the verification mode as RF, or verification won’t be successful. 2.3.2 Enroll fingerprint card Enroll fingerprint and write fingerprint into card. Operation: 1.
F18 User Manual V1.0 Step 3: Press finger properly three times. Step 4: Device prompts “please show card”. Step 5: Put the card in the induction area, waiting for the device to read fingerprint data into card until the enrollment succeeds. 2. Verification: Sway the card in the induction area. After the device inducts the card, move the card off. When the verification is successful, the device will give prompt.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2.3.3 Clear card information Delete all the information in the card being operated at present. Operation: Put the card in the induction area, waiting for device to delete all the information in the card. If the card data has been stored in the device, the device will remind you whether to delete the information in the device or not. “Yes” is to delete the user’s fingerprint and information in the device.
F18 User Manual V1.0 Press ▲/▼ to select “only copy user information” or “copy user information and fingerprint”, and then press OK. 2.3.5 Set card parameter value Set password of Mifare card and decide whether the information should be saved or not. Fingerprint card password: After the password is set, the device will write password into the enrolled fingerprint card.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. card can only be used on this device. Save the information: Decide whether to save the enrolled information to the device when enrolling card or fingerprint card. “No” means the information is only saved in the card. “Yes” means the information is saved in both card and device. Operation: Press ▲/▼to move cursor to the item to be set. If it is the input box, press numeric keys on small keyboard to input the value.
F18 User Manual V1.0 2.4 Access Control Option★ Access control option is to set user’s open door time zone, control lock and related device’s parameters. If the device support external facial instrument, it can not support the camera and advanced access control at the same time. To unlock, the enrolled user must accord with the following conditions: 1. The current unlock time should be in the effective time of user time zone or group zone. 2.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2.4.1 Time Zone Setting Time zone is the minimum unit of access control option. The whole system can define 50 time zones. Every time zone defines seven time sections (namely, a week). Every time section is the effective time zone within 24 hours everyday. Every user can set 3 time zones, “or” exists among the three zones. It is effective if only one is satisfied.
F18 User Manual V1.0 Input time zone number. If the enrolled time zone has number already, then the time zone setting will displayed automatically. Press ▲/▼, / to move the cursor to the input box, press numeric key on small keyboard to input value. Then press Menu to save it and press ESC to exit. 2.4.2 Holidays Setting Special access control time may need during holiday. It is difficult to modify everybody’s access control time.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Press ▲/▼ to select add. Press ▲/▼ to move cursor to the input box. Press numeric key on small keyboard to input the value. After setting, press Menu to save it. Then press ESC to exit. Edit holidays Select the line to be edited. Press OK directly or press Menu to select edit in operating menu.
F18 User Manual V1.0 Press ▲/▼ to move cursor to the input box. Press numeric key on small keyboard to input the value. After setting, press Menu to save it. Then press ESC to exit. Delete holidays Select the line to be deleted. Press Menu to select delete in operating menu. Notice: If holiday access control time is set, user’s open door time zone during holiday subject to the time zone here. 2.4.3 Group time zone setting Grouping is to manage employees in groups.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 1. Add group time zone Press Menu to get operating menu. Press ▲/▼ to select add.
F18 User Manual V1.0 Notice: 1) If holiday is effective, only when there is intersection between group zone and holiday time zone, can the group member open the door. 2) If holiday is ineffective, the access control time of group member won’t be affected by holiday. Press ▲/▼to move cursor to the item to be set. If it is the input box, press numeric keys on small keyboard to input the value. If it is the roll box, press / to switch the values.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. In the Access Group setting interface, select the line to be deleted. Press Menu to select delete in operating menu. 2.4.4 Set Unlock Combination Make various groups into different access controls to achieve multi-verification and improve security. An access control can be made up of 5 groups at most. Operation: Press Menu -> User management -> Access Setting -> Unlock Combination setting: 1.
F18 User Manual V1.0 Press ▲/▼ to move cursor to the input box. Press numeric key on small keyboard to input value. After setting, press Menu to save it. Then press ESC to exit. 2. Edit unlock combination Select the line to be edited. Press OK directly or press Menu to select edit in operating menu. Press ▲/▼ to move cursor to the input box. Press numeric key on small keyboard to input value. After setting, press Menu to save it. Then press ESC to exit. 3.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. menu. 2.4.5 Access Control Parameters Set device control locks and related device parameters. Lock driver time length: Device control electronic lock is in enabling time. （effective value 1～10 seconds) Door sensor delay: After the door is open, delay the time to check door sensor. If door sensor state is different from the normal state of door sensor mode, alarm will be given off. This time is called door sensor delay.
F18 User Manual V1.0 2) If time zone of NO or NC has no definition, the device will prompt it and add the definition in time zone setting. Operation: Press Menu -> User Management -> Access Setting -> Access Control Parameters: Press ▲/▼to move cursor to the item to be set. If it is the input box, press numeric keys on small keyboard to input the value. If it is the roll box, press / to switch the values. After setting, press Menu directly to return to the last interface.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 1:1 Trig: if select “Yes”, when user use 1:1 match mode, alarm signal will come out. Or there is no alarm signal. 1: N Trig: if select “Yes”, when user use 1: N match mode, alarm signal will come out. Or there is no alarm signal. Pwd Trig: If select “Yes”, when user use password verification mode, alarm signal will come out. Or there is no alarm signal.
F18 User Manual V1.0 2.4.7 Anti-passback Setting★ 【overview】 Sometimes, some illegal person follows the employee into the gate, which will bring security problem. To prevent such risk, this function is enabled. In record must match out record, or the gate won’t be open. This function needs two machines to work together. One is installed inside the door (master machine hereinafter), the other is installed outside the door (slave machine hereinafter).
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. The choice of Machine models: Press ▲/▼ to switch the input box. Press / to modify the setting. Select Anti-Out, refer to out anti-pass back, only user’s last record is in-record, the door can be open. Otherwise it will trigger the alarm signal as illegal access. Select “None”, refer to no anti-pass back, and no alarm will be triggered. After setting, press Menu directly to return to the last interface.
F18 User Manual V1.0 will trigger the alarm signal as illegal access. Out: New user’s first time access will pass. In anti-passback mode not restrict of IN. In-Out anti-passback (APB-Out/In): New user’s first time access will pass. Only user’s last record is out-record, can the door be open when he/she want IN. Otherwise it will trigger the alarm signal as illegal access. Only user’s last record is in-record, can the door be open when he/she want out.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 3. Communication Option When the device and PC are used to transmit data, it is necessary to use communication wire to set communication parameters in the device. When the device is in communication, “communicating…” appears. Don’t operate the device then. Notice: When the device is communicating with computer, please check the setting here.
F18 User Manual V1.0 Device IP address: IP is 192.168.1.201 by default. You can modify it if it is necessary. But it cannot be the same with that of PC. Subnet mask: It is 255.255.255.0 by default. You can modify it if it is necessary. Gateway address: It is 0.0.0.0 by default. If the device and PC are in different net segment, it is necessary to set address. Net speed: Set the speed according to the LAN where the device is. Operation: Press ▲/▼to move cursor to the item to be set.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 485 is recommended. RS232: Whether use RS232 to communicate. Select “ON” if RS232 is to be used. RS485: Whether use RS485 to communicate. Select “ON” if RS485 is to be used. USB: Whether use USB to communicate. Select “ON” if USB is to be used. RS232, RS485 and USB cannot be used at the same time. Operation: Press ▲/▼to move cursor to the item to be set. Press / to switch the values.
F18 User Manual V1.0 Device ID: 1—254. If RS232/RS485 is used, this ID needs to be input on the software communication interface. To improve the security of attendance data, connection password needs to be set here. Connection password must be input when PC software is to connect device to read data. Connection Password: System password is 0 by default.（namely, there is no password. ) it can be set as other value. After setting, the password must be input if software is to communicate with device.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 3.4.1 Input configuration User defined format: User defined Wiegand input format Bit digit: Wiegand data digit length Pulse width: Pulse width is 100 microseconds by default, which can be adjusted from 20 to 800. Pulse interval: It is 900 microseconds by default, which can adjusted between 200 and 20000. Input content: Content contained in Wiegand input signal, including User ID or card number.
F18 User Manual V1.0 Input the name of user-defined format. Press ▲/▼to move cursor to the item to be set. If it is the input box, press numeric keys on small keyboard to input the value. If it is the roll box, press / to switch the values. After setting, press Menu directly to return to the last interface. Press “ESC” to cancel setting and return to the last interface. 3.4.2 Output configuration Format: It is the defined format in the system. User need not specify total digit and the information position.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Input the name of user-defined format. Press ▲/▼to move cursor to the item to be set. If it is the input box, press numeric keys on small keyboard to input the value. If it is the roll box, press / to switch the values. For example, to modify failed ID as 10, press / firstly to select “Yes”, then input 10 in the input box. After setting, press Menu directly to return to the last interface.
F18 User Manual V1.0 4. System Option Set system parameters to meet user’s demand as many as possible. 4.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Time format: Time format displayed on initial interface. Press / to set 24H or 12H. Date format: Press / to select format. The fingerprint sensor supports ten date format: YY-MM-DD, YY/MM/DD, YY.MM.DD, MM-DD-YY, MM/DD/YY, MM.DD.YY, DD-MM-YY, DD/MM/YY, DD.MM.YY and YYYYMMDD. Select your desired date format. Press / to set 24H or 12H. Keyboard voice: Press / to set whether the key has voice or not.
F18 User Manual V1.0 Press ▲/▼ to move cursor to the input box. Press numeric key on small keyboard to input the value. If it is the input box, press numeric keys on small keyboard to input the value. If it is the roll box, press / to switch the values. After setting, press OK or menu directly to save the setting and return to the last interface. Press “ESC” to cancel setting and return to the last interface. 4.2 Data management Delete attendance record: Delete all attendance records.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. data for how to upload the propaganda pictures.) Operation: Press “▲/▼” to preview the propaganda pictures in the device. Click OK to delete all these pictures. After deletion, the next picture will appear. Click “delete all” to delete all the propaganda pictures in the device. Then press “ESC” to return to data management interface. 4.
F18 User Manual V1.0 4.4 Display Setting Press ▲/▼ or / to move cursor to the input box. Press numeric key on small keyboard to input the number. After setting, press menu directly to save the setting and return to the last interface. Press “ESC” to cancel setting and return to the last interface. 4.4.1 Verification When user is using 1:1 match or password verification, he may forget to enroll fingerprint or does not press the finger in the proper way.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.4.3 Picture cycle interval Picture cycle interval means how soon will the picture be changed （effective value is 3～999 seconds.) Display propaganda picture: User can display some propaganda pictures on the screen. The operation refers to this manual 10.4 Propaganda picture upload rules 4.4.4 Clock display delay Time display delay means the clock picture display time length after verification.
F18 User Manual V1.0 interface success, machine displayed: "Standby Interface modified success". Then you should restart the device. Notice: "4.4.3 Picture cycle interval" and "4.4.4 Clock display delay" functions are fit use common mode of interface style only. When you select matrix or magic mode, these functions are invalid. Display screen show the matrix or magic style all the hil Common-Style Matrix-Style Magic-Style 4.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. keyboard definition to that of factory. Reset bell option: Only reset bell option to factory state. Reset other parameters: only reset communication option, system parameter and interface option and so on to factory state. Press ▲/▼ to move cursor to the button to be operated. Press OK to start operation.
F18 User Manual V1.0 Fingerprint image display: Select whether to display the fingerprint image on the screen when it is enrolling or verifying there are 4 options: display upon both enrollment and verification, only display upon enrollment, only display upon verification, not display upon enrollment and verification. Lock power-off: To prevent hostile power-off, select whether to lock power-off or not. “Disable”: the power is off 3 seconds after pressing power-off.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 5. Date Time 5.1 Date Time option Accurate attendance time is based on accurate time date. Enter time date to set options: Operation: Press ▲/▼ to move cursor to the input box. Press numeric key on small keyboard to input the value. After setting, press menu directly to save the setting and return to the last interface. Press “ESC” to cancel setting and return to the last interface. 5.
F18 User Manual V1.0 The regulations are different in different countries. At present, nearly 110 countries adopt DLST. To meet the demand of DLST, a special option can be customized on our RF Card Time & Attendance recorder. Make the time one hour forward at XX (minute) XX (hour) XX (day) XX (month), and make the time backward to the standard time at XX (minute) XX (hour) XX (day) XX (month) if necessary. Operation: 1) Set DLST as “ ON ”. 2) Input DLST start time and end time.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 3) Press /“OK” to save setting. Press “ESC” to exit without saving.
F18 User Manual V1.0 6. PenDrive Management Import user information, fingerprint template, attendance data and so on in the device to attendance software or import user information and fingerprint to other devices through U disk. 6.1 Download data 1. Download attendance data Save all attendance data in the device to U disk. Operation: 1) Insert U disk into USB slot of the device through mini USB. 2) Press “▲/▼” to Download Record. Press OK for verification.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. device ID). 2. Download user data Save all users’ information and fingerprint in the device to U disk. Operation: Insert USB flash disk into USB slot of the device, press “▲/▼” to download user, then user.dat (user information) and template.dat (fingerprint template) will be saved in U disk. 6.2 Upload data 1. Upload user data Upload user information and fingerprint saved in U disk to device.
F18 User Manual V1.0 Insert U disk into USB slot of device. Press “▲/▼” to preview the pictures of U disk. If you want to upload the picture, click OK. Then the next picture will appear automatically. After upload, press ESC to exit.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 7. Auto Test The device can test various modules automatically to help operator to judge the module with fault quickly. Auto test include TFT display Test, Audio Test, Keyboard Test, Sensor Test and RTC Test. Press “▲/▼” to select the item to be selected. Press OK to start it. 7.
F18 User Manual V1.0 Press OK to continue and press ESC to exit. 7.3 Keyboard test The device can automatically test various keyboards to see whether the keys work normally or not. Press any keyboard on the test interface (except for OK and ESC) to check whether the pressed keyboard is in accordance with that displayed on the screen. Will appear whether it is the right key, and it is not the right key. Press ESC to exit. will appear whether 7.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 8. Query Record Employee’s attendance records will be saved in the device. For convenience, query record function is provided. According to user’s input query condition, the record will be displayed on the screen for user to check. Notice: The picture may be different from your device. The real product prevails. Enter query attendance, input corresponding information in the query condition input box.
F18 User Manual V1.0 Press “▲/▼” to move the cursor to the line to be queried. And press OK to check attendance record.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. It is the attendance status. The code displayed in the list is the status code. And status name will be displayed in the information column.
F18 User Manual V1.0 9. System Information Use system information to check the current device’s saving status, its version information and so on. 9.1 Record capacity Display the count of enrolled users, administrator, password enrollment, the current enrolled fingerprint and the current saved attendance record. Also display the capacity of the fingerprint and attendance record, as show below: 9.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
F18 User Manual V1.0 10. Appendix 10.1 Keyboard Different device has different kinds of keyboard, and the function of the keyboard is different. Please check the fallows: Keyboard type 1: key function Numeric key 1. 0～9 , used to input employee number, password and so on. 2. 0 on manage user interface is shortcut of “query user”. ▲ 1. Upward. 2. Status key. ▼ 1. Downward. 2. Status key. 1. Modify current item value. 2. Status key. / 1. Power-off.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Keyboard type 2: key function Numeric key 1. 0～9,used to input employee number, password and so on. 2. 0 on manage user interface is shortcut of “query user”. ▲ 1. Upward. 2. Shortcut. ▼ 1. Downward. 2. Shortcut. */ 1. Modify current item value. 2. Shortcut. 3. Enable T9 input. 4. Switch input method in T9 input. / 1. Modify current item value. 2. Space back.
F18 User Manual V1.0 Keyboard type 3: key function Numeric key 1. 0～9,used to input employee number, password and so on. 2. 0 on manage user interface is shortcut of “query user”. ▲ 1. Upward. 2. Shortcut. ▼ 1. Downward. 2. Shortcut. 1. Right. 2. Shortcut. 1. Left. 2. Shortcut. / 1. Shutdown. In the initial interface press this key for 3 seconds to enter a shutdown countdown status. 2. Space back.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 10.2 USB USB Host The device will may be used as USB Host to exchange data with external U disk. The data transmission speed is quick, the traditional fingerprint machine only supports the RS232, RS485 or Ethernet way data transmission, when as a result of physical condition limit, data quantity big, and the data transmission cost quite long time.
F18 User Manual V1.0 fingerprint or password verification in 10 minutes. For example: the employee with User ID of 1 can check his intraday attendance record by pressing after fingerprint verification. Notice: The picture may be different from your device. The real product prevails. Press ▲/▼ to read attendance record. to query detailed information. Press Press ESC to return to initial interface. 10.4 Propaganda picture upload rules The picture format must be JPG. Other formats are not accepted here.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. The picture’s resolution is 320 wide and 240 high. It is better not to be more or less than it. The propaganda pictures’ count should be 10 at most. If you want it, please contact our businessman or technician. 10.5 Card support (ID/EM, MIFARE Card) ★ In order to meet security market need, our fingerprint biometric verification reader can be embedded EM, MIFARE reader module.
F18 User Manual V1.0 10.6 Web time & attendance ★ Summary The T & A system is based on Web Server technical, use Page Request technical to process and manage data, it integrate many feature ,such local data collection ， intellectualized port (RS232/RS485), communication protocol conversion, image collection, alarm data stored up , and WEB server etc.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2. Fully compatible with our company Inc program WEB Server platform may be fully compatible with current program each other entirely is mutually beneficial, ability to much more flexible to meet customer need. 3.
F18 User Manual V1.0 This function can be set in the fingerprint machine option, Press Manu key, enter the Date Time. In the XX Month XX Date XX minute move forward an hour, and that in the XX Month XX Date, XX Minute move Back an hour. The operation refers to this manual 5.2 DLST. 10.10 Master-slave function ★ Overview In order to reduce the repeated enrollment operation in multiple devices, we can use the master-slave option.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. You can set every few hours to synchronize. (With range of 0-99, only the device is set as master unit, this setting is valid) 2) Connection Choose the master unit and slave unit. Connect them to the LAN through the switch. Restart the devices after connection. The master unit is an ordinary fingerprint device. After the device restarted, slave unit will automatically search the master unit and send a request.
F18 User Manual V1.0 10.11 About the human rights privacy statement Dear customer： First thank you for using Multi-biometric identification product we design and produce.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. not any legal liability for any damage it cause. Note: There are limited rights to privacy and human rights in the Chinese Constitution. The personal dignity of citizens of the People's Republic of China is inviolable and further, that insult, libel, false accusation or false incrimination directed against citizens by any means is prohibited, the protection of freedom of the person and the residence .
F18 User Manual V1.
