Copyright Statement Copyright © 2005 by ZTE Corporation The copyright of this User Manual belongs to ZTE Corporation and under the protection of Copyright Law of the People’s Republic of China and other relative laws. No part of this publication may be excerpted，reproduced, translated or utilized in any form or by any means (electronic or mechanical，including photocopying and microfilm) without prior written permission from ZTE Corporation. Any violation behavior will be punished.
Contents 1 Function Introduction................................................................................. 1 2 Safety Precaution ....................................................................................... 4 2.1 During operation ..................................................................................... 4 2.2 Use environment ..................................................................................... 4 2.3 Battery & Adapter ...............................................
8.4.1 Hot Line ............................................................................................. 24 8.4.2 Call Restrict........................................................................................ 25 8.4.3 Originate Mode .................................................................................. 27 8.4.4 Ring Tone ........................................................................................... 28 8.4.5 Auto Hyphen .....................................................
11.5 Volume ................................................................................................ 52 11.6 Font……………………………………………………………………53 12 Data service............................................................................................ 54 13 Input method .......................................................................................... 54 13.1 English Input ....................................................................................... 55 13.1.1 English Letter Input....
ZTE WP560/960B/BD User Manual 1 Function Introduction Thank you for choosing WP560/960 (Model B/BD) Fixed Wireless Phone (FWP) of ZTE Corporation. To keep your FWP under the best condition, please read this manual carefully before use, and please keep this manual well in case of future use.
ZTE WP560/960B/BD User Manual WP560/960 series of CDMA FWP have the following functions： Voice service Function Description Making a call After applying to the local telecom operator for relevant voice services, you can use the FWP to make local, domestic long-distance, international and IP calls Receiving a call You can use the FWP to receive incoming calls.
ZTE WP560/960B/BD User Manual Data service Function Description Internet You can enjoy internet access services including CDMA 2000 1X high-speed wireless file transmission, email receiving/sending and homepage exploration, etc. Dormancy function is also supported access services PC fax You can use a PC to receive or send a fax. Asynchronous data This service can enable you to realize low-rate (9.6/14.4Kbps) file transmission and internet access services.
ZTE WP560/960B/BD User Manual 2 Safety Precaution 2.1 During operation 1） The FWP may interfere with heart pacemaker, hearing aid and other electronic medical devices, please follow the instructions given by your equipment suppliers or consult your doctor during operation. 2） Do not disassemble the FWP. 3） If you clean the surface of the FWP, use only a dry, soft cloth with cleanser containing no alcohol, benzene or acetone. 4） Don’t drop the FWP or have it hit by strong impact.
ZTE WP560/960B/BD User Manual 5） Keep the phone away from magnetic field and static electricity. 2.3 Battery & Adapter 1） Use only the original AC/DC power adapter. Don’t use the adapter for other purposes. 2） The adapter must be used within the specified AC voltage range. 3） The phone will give an alert when the power is insufficient. To ensure normal communication, charge or use the backup battery during low power (ensuring the battery’s power is sufficient).
ZTE WP560/960B/BD User Manual No. Name 1 Q'ty Remark FWP Host 1 2 Handset 1 3 AC/DC Adapter 1 4 Ni-MH Battery 1 5 Prints 3 User Manual, Warranty Certificate of Qualification 6 USB cable 1 Optional 7 Software Disk 1 Optional 8 Screw 1 For fixing the battery cover Include the plastic package Rechargeable Including an antenna. Card and The FWP has two models: Model B and Model BD, Only Model BD FWP is equipped with USB cable and disk.
ZTE WP560/960B/BD User Manual 4 Instruction Icons in User Manual Attentions or cautions Function overview Operation guide Operation skill 5 FWP Installation 5.1 Installing antenna Make sure to switch off your FWP, disconnect the power adapter and battery before installing the antenna. Please do not pull the antenna out after it is installed. Do not frequently revolve the antenna or circumrotate it by 360 degrees, for that will affect signal reception capability and lifespan of the FWP.
ZTE WP560/960B/BD User Manual 5.
ZTE WP560/960B/BD User Manual ② Power Switch ③ USB Interface/ Serial Port Interface Power on the FWP: move the power switch (see the picture above) to “ON”, the FWP will give a “du” alert and enter into idle mode. Power off the FWP: move the power switch (see the picture above) to “OFF”. Installing the power adapter The power for the FWP can be fed from the direct current output from the power adapter which is connected to the indirect current power source.
ZTE WP560/960B/BD User Manual 1. Remove the battery cover 2. Install UIM card (pay attention to UIM card’s cut corner position) 3. Follow the arrow to push the UIM-card into the card holder Installing Battery The FWP is equipped with a rechargeable built-in battery which can supply power to the FWP when the power adapter is not available. When the power adapter is supplying power to the FWP, it is also charging the battery.
ZTE WP560/960B/BD User Manual 1. Remove the battery cover 2. Install battery (pay attention to polarity) 3. After battery installation 4. Install battery cover For the first time use, please charge the Ni-MH battery for over 16 hours non-stop.
ZTE WP560/960B/BD User Manual Connecting the FWP to a computer Wall-Mount Installation When in mount installation, plug out the anti-slip clip of handset as shown in Fig. 1, and then reverse it and plug it back as shown in Fig. 2 to avoid the slip of handset in mounting position. Fig. 1 Fig.
ZTE WP560/960B/BD User Manual 5.3 Service Status Check Display in service area: Turn on the FWP power, when the power cable is connected properly, the FWP’s LCD window will light up and LOGO will be displayed. The FWP will start to search for local CDMA digital network signals. Once the network is found and the service is available, as shown in Fig. 1, you can make a call. Display in area with no service: When there is no service in your area, “No Service!” will be displayed on the FWP.
ZTE WP560/960B/BD User Manual 6 Getting to know your FWP 6.
ZTE WP560/960B/BD User Manual the handset is put back. H .F : the light will keep on after pressing the handfree key for off-hook, and turn off after pressing the handfree key again for on-hook. 6.2 Keys 1) Press this key to enter into SMS menu 2) Soft keys(left : right: ) There are Left Soft key and Right Soft key. Pressing the Left Soft or Right Soft key will execute the function of the left or right icon on the bottom of the LCD window.
ZTE WP560/960B/BD User Manual Press this key to prevent the other person from hearing your voice but keep connection during talk. You can also press this key to mute the ring tone of the FWP when there is an incoming call and at the same time you can receive the call as normal. The FWP will quit mute state when the other person hangs up or you receive the call. 5) When you dial, press key to enter timed-pause character “P”. One “P” means a 3-second delay. Several Ps can be input.
ZTE WP560/960B/BD User Manual 10) Press this key to delete the character before the cursor or return to the upper menu. 11) Handfree key. Press this key to enter Handfree state. 12) 0－9 number and letter keys，*，# To input numbers and characters. When allowed, “*” can be used to switch to punctuation mark input mode. Under all the list interfaces, you can press * or # to turn over or turn down the page. Press , you can return the upper menu.
ZTE WP560/960B/BD User Manual Icon Description Stands for CDMA digital format Indicates the strength of current signal, the more bars, the stronger the signal is Stands for network service is currently available. will appear when there is no network service flickers to indicate there is new messages.
ZTE WP560/960B/BD User Manual Icon Description When you use your FWP only with the power adapter, the icon of will replace the icon of When there is a new voice mail, Mon on the LCD will appear on the place of Indicates the current week 7 Calling function 7.1 Make a call Function overview If you have applied to the local telecom operator for relevant voice services, you can use the FWP to make local, distance, international and IP calls.
ZTE WP560/960B/BD User Manual Hang up the handset to end the call. 3) Handfree talk Press handfree key in idle mode; A dialing tone is heard, dial the desired number; Press key or wait for several seconds, the call will be made automatically; Press handfree key again to end the call. 4) Preset dial Dial the desired number directly in idle mode; Press key to make the call; Press key to end the call. 7.
ZTE WP560/960B/BD User Manual When there is an incoming call, press the handfree key; Talk time displayed on the LCD; Press handfree key again to end the call. 7.3 Redial Function Overview This function is for redialing the last called number. Operation Guide 1) Using handset Pick up the handset in idle mode, then a dialing tone is heard; Press key twice continuously to dial out the last called number; Hang up the handset to end the call.
ZTE WP560/960B/BD User Manual Operation guide 1) Add timed pause during dialing When you are dialing, Press key to input timed pause character “P” for delay in dialing. One “P” is 3-second delay. 2) If you dial a phone number with extension number, (e.g., the phone number is 123456, the extension number is 12) you input 123456PP12, your phone will dial 123456 first, then after 6 seconds, it will dial 12. In this way, you can dial the extension number directly. 7.
ZTE WP560/960B/BD User Manual 4） During the Emergency state, the volume of your key tone will be enhanced Emergency calls are allowed even if Call Restrict is activated. Different countries have different emergency call numbers, so the emergency call numbers preset in the FWP won’t be effective in all countries. Please consult your local operator for details when purchasing this product. 8 Optional Function 8.
ZTE WP560/960B/BD User Manual 8.3 Call Waiting Function overview When there is a second incoming call when a call is in progress, you can choose to receive or reject the second call. If you choose to receive it, you can switch between the two calls. Apply to your local telecom operator first to activate this function and consult them for the operations. 8.4 Call Setting Five submenus are available, including ① Hot Line ② Call Restrict ③ Originate Mode④Ring Tone⑤Auto Hyphen 8.4.
ZTE WP560/960B/BD User Manual 2） Press digital key <1> to select【Hot Line】menu, You will enter the interface on the right: ① Setting ② Edit 3） Select Setting, two Hot Line modes will appear: On and Off. You can choose to activate this function or not. 4） Press the Left Soft key to return to the upper menu. 5） Select Edit you will enter the editing interface of hotline number on the right: Hotline： OK Back 6） Press the Left Soft key to confirm the number and when you return to the idle mode.
ZTE WP560/960B/BD User Manual Operation guide 1） In idle mode, press Left Soft key and then press digital key <2>, you will enter the menu of Call Setting. 2） Press digital key <2> to select 【Call Restrict】, and then its submenus are displayed. 3） Move the scroll bar to select the type of restriction you desires among the submenus: ① Origination ② Nation Wide ③ International ④ Incoming Call ⑤ Specified Press the Left Soft key to enter the activation interface of the restriction type you selected.
ZTE WP560/960B/BD User Manual displayed. 3） Press digital key <5> to choose【Specified】, you will enter the interface on the right: ① Setting ② Edit 4） Select Setting, you can activate or deactivate this type of restriction by selecting On or Off. 5） Press the Left Soft key to return to the upper menu. 6） Select Edit ,you will enter the editing interface of Specified： Specified number on the right: OK Back 7） Press the Left Soft key to confirm the input numbers and return to the upper menu.
ZTE WP560/960B/BD User Manual 2） Press digital key <3> to select 【Originate Mode】 and enter its submenu, three options are displayed: ①Sent Press (calls can be dialed out after pressing ) ②After 3’S（the call will be automatically dialed out 3 seconds after the number is input.） ③After 6’S（the call will be automatically dialed out 6 seconds after the number is input.） 3） Select the desired originating mode and return to the upper menu. 8.4.
ZTE WP560/960B/BD User Manual Operation guide 1） In idle mode, press the Left Soft key and then press digital key <2> to enter Call Setting menu. 2） press digital key <5> to enter the setting menu of Auto Hyphen 3） Move the scroll bar to select between ON and OFF options. 9 Short Message Function overview The contents of short message are mainly texts and digits.
ZTE WP560/960B/BD User Manual and is replaced by submenus.If there isn’t any message, your system will not display above information. 9.1 Create New Function overview Under this menu you can write new message. 160 English characters are allowed for one message. Operation guide 1） In Short Message interface, press digital key <1> to How are you! select Create New, you will enter the interface on OK 160 Word the right: 2） After inputting the message, press the Left Soft key for confirmation.
ZTE WP560/960B/BD User Manual 9.2 Receive and Send Message. 9.2.1 View Inbox Function overview When a new message is received, the FWP will give an alert with four continuous “di” sounds. At the same time, the reception of a new message is displayed on the LCD window together with the information of the sender. The icon for new message will flicker on the standby picture.
ZTE WP560/960B/BD User Manual 2） The list of old messages is shown as the right picture: *26260000 *12345678 *87654321 Menu 1/3 View 3） You can scroll to the desired message by pressing ▲ and ▼. 4） At this time ,you can get the Call Back phone number by pressing key, if pressing the key again, you will dial out the number.
ZTE WP560/960B/BD User Manual ① New entry (save as a new record) ② Existing (save to an existing record) Operation guide-Clear Inbox 1） Under the View Inbox interface, Press digital key <3> to enter【Clear Inbox】, which has three options:① Clear Old Msg ② Clear New Msg ③ Clear All 2） Click the corresponding number key or press ▲ or ▼ to scroll to the desired option, you will perform the corresponding operation When the messages reach to the maximum capacity, the still icon will appear on the LCD window.
ZTE WP560/960B/BD User Manual to which you have sent messages is displayed as the right picture: 2） You can scroll to select the number for viewing. You can click the Right Soft key to enter View or click the Left Soft key, three options can be seen:① Send;②Edit;③Delete. Operation guide-Unsent Msg You can send the messages later by this function. 1） Save your editing message(refer to 9.1). 2） Later when needed ,press digital key <2> Under the interface of 【View Outbox】to enter the Unsent Msg .
ZTE WP560/960B/BD User Manual 2） You can click the corresponding number key or move the scroll bar by pressing ▲ or ▼ to have the desired operation. In all the listing interfaces, the names matching with those in Phonebook will be listed. 9.2.3 Voice Message Function overview Voice Message is a service similar to Voice Recorder. You can forward the incoming call to the Voice Message. You can get the voice messages through the FWP saved in the server of the operator at any time and any place.
ZTE WP560/960B/BD User Manual activate the function of Call Forwarding. 3） The number of Voice Message is provided by the operator. Users can edit in the editing interface of VM center code (refer to 9.2.4). The function of Voice Message must be activated by the operator. If it is not activated, voice messages cannot be received even if the number is set.
ZTE WP560/960B/BD User Manual La m p : when a new message is received, the FWP will just lighten up to show the information of the message sender. You can move the scroll bar via the directional keys to select the alert type. 2） Priority Three levels of priority are available: Normal Urgent Emergency You can scroll to and select the desired level by moving the direction keys.
ZTE WP560/960B/BD User Manual One of the necessary steps of using the service of Voice Message is to input the code of the voice message center. 6） Call Back# If you want the message receiver to reply to another number, you need to input the number here. 10 Message Saving 10.1 Phonebook Function overview Submenus for Phonebooks include ①View book②Search book③Add entry ④Speed dial.
ZTE WP560/960B/BD User Manual 1） If no number is input in the Phonebook, only“ （N e w e nt r y）” is displayed. 2） You can have the following operations: Press the Left Soft key, you can add new entry, for which the detailed operation is referred to Add e nt r y in 1 0 .1 .3 . Press the Right Soft key, and then you can have the following operations: ① Add entry：please refer to Add e nt r y in 1 0 .1 .3 for details. ② Search book：please refer to Se a rch book in 1 0 .1 .2 for details.
ZTE WP560/960B/BD User Manual 3） Input the name of new group, and press the Left < Music 01 > Softkey to confirm the input and return to the Edit Save previous display. Move to the next line, see the right picture: 4） You can press the Left Soft key or the ◄► key to select the music. Finally please press the Right Soft key to save this operation. Or you can choose to click the Right Soft key 1） The following options will appear: ① Add group;② Modify group;③ Delete group.
ZTE WP560/960B/BD User Manual All the records within the group will be deleted if a group is deleted. Only the self-established group can be deleted. “All entry” and “Ungrouped” belong to fixed classification. 10.1.2 Search book Function overview You can search by name, number and group.
ZTE WP560/960B/BD User Manual interface. Now you need only to click the Right Soft key to activate the function of to start searching the information of the number you specified. 3） Search by group Move the scroll bar to via ▲ and ▼, and click the Left Soft key to activate the function of or click ◄ and ► to select different group. Press the Left Soft key to confirm the selected group, and then click the Right Soft key to activate the function of to start searching the information of the group.
ZTE WP560/960B/BD User Manual 10.1.3 Add entry Function overview You can add new contacts via the submenu Add entry of Phonebook. Operation guide 1） In idle mode, press the Right Soft key to enter Phonebook. 2） Press digital key <3> to select Add entry. 3） And Edit entry appears.
ZTE WP560/960B/BD User Manual Existing 10.1.4 Speed Dial Function overview This function enables you to manage, add, edit, view and delete speed dial numbers. You can make calls or send messages in the viewing interface or from the list of speed dial numbers. The FWP supports speed dial by inputting the address into the interface in idle mode.
ZTE WP560/960B/BD User Manual Click digital key <2> to enter Phone Book and select the number of the specified address. After editing ,return back and click digital key <3> to save the setting. Operation guide- viewing existing record 1） When you enter Speed Dial again, the interface is as the right picture: 001 81512345 002 26260000 Menu 2/2 2） The list of numbers for speed dial is displayed, e.g., 【002 Back 26260000】, here the first three numbers 002 is the address for the phone number 2626000.
ZTE WP560/960B/BD User Manual Function overview- having speed dial in idle mode In idle mode, two ways of speed dial are available., Operation guide 1) In idle mode, input the correct address and press , if the address is recorded, the system shall start dialing; if not recorded, There will be an alert of No Record!!! 2) In idle mode, input the correct address and hold the last key of the input for a few seconds.
ZTE WP560/960B/BD User Manual 10.2.1 Incoming Call Operation guide 1) Press digital key<1> in Call History or press ▲ in idle mode to view the incoming calls. 2) The list of incoming calls will be displayed, among which you can select the desired number. 3) Press the Left Soft key to enter the view interface, the information related to the incoming calls will be displayed. 10.2.
ZTE WP560/960B/BD User Manual 10.2.3 Missed Call Operation guide 1) In Call History, press digital key<3> to view Missed Call, or you can view Missed Call directly by pressing ▼ in idle mode. 2) The missed calls will be displayed, and you can move the scroll bar to the desired number. 3) Press the Left Soft key to enter the interface of View, and the information relative to the missed call will be displayed.
ZTE WP560/960B/BD User Manual 1) In Call History, press digital key <4> to enter the submenu of Call Time 2) Scroll to the submenu to be viewed or press the corresponding number key to select the submenu. 3) The total talk time and the number of calls for the selected submenu will be displayed the call time here may vary from your actual call time , so you can refer to it but not depend on it. 11.
ZTE WP560/960B/BD User Manual Greeting ,The greeting words shall be no longer than 16 ASCII characters. 2) After editing, press the Left Soft key for confirmation. The new greetings will be displayed after the FWP returns to the idle mode. 11.2 Phone Number Function overview You can set the number of your FWP for your convenience in operation. Operation guide 1) In Setting, press digital key <2> to enter editing interface of your phone number. 2) After editing, press the Left Soft key for confirmation.
ZTE WP560/960B/BD User Manual Be ll < Sound 1 > 4) The line that the scroll bar is on is the alarm time you are editing. You can press ◄ or ► to move the cursor to the number you want to revise, at this time the number will flicker, and you can input the desired alarm time by pressing the number keys.
ZTE WP560/960B/BD User Manual 11.4 Backlight Function overview This function enables you to choose the time interval from the last time when you trigger on the backlight on the LCD window to the time when the backlight turns off. The time interval may affect standby time and talk time supported by the battery. Operation guide 1) In Setting Menu, press digital key <4> to enter Backlight’s setting menu. 2) three options including 5 Seconds、10 Seconds、Never are displayed.
ZTE WP560/960B/BD User Manual 1) Under the menu of Setting, press digital key <5> to enter the setting menu of Volume. 2) three options are available: ① Ringer ② Key Tone ③ Alert Tone Select the desired option and enter it for adjustment. Each option has five scales of volumes 3) Press or to select the appropriate volume, and then press the Left Soft key for confirmation. Function overview You can press key to adjust the volumes of the receiver and the microphone.
ZTE WP560/960B/BD User Manual Operation guide Pl ease r ef er t o t he f ol l owi ng st eps: 1) In Setting, press digital key <6> 2) Press 3) Press the Left Soft key for confirmation and return to the upper menu. or to enter Font Setting to select your desirable font. 12 Data service Please refer to Data Service User Instruction in USB installation disk.
ZTE WP560/960B/BD User Manual Under upper or lower case English letter input mode, the English letters can be input by clicking the 26-English-letter keys once or more times. The details are referred to the following operation guide. 13.1 English Input 13.1.1 English Letter Input Operation guide 1) Press Right soft key to select uppercase letter (ABC) or lowercase letter ( abc) input in editing state. 2) Click a key to input the first letter on the key.
ZTE WP560/960B/BD User Manual 3) Take “ tomorrow” 4) And then press as an example， press 8, 6, 6 and 6 in turn. to select “ tomorrow” into the editing area. 13.2 Number Input Operation guide 1) Press Right Soft key to move to number input method in editing state. 2) Press the desired number key in turn. 3) In editing, * and # stand for themselves. Press key, one character before the cursor will be deleted. Press key and hold, all the characters will be cleared. 13.
ZTE WP560/960B/BD User Manual 14 Power supply Function overview 1） The power supply of the FWP has two types: power adapter (DC 6V) and backup battery. 2） Rechargeable battery has several statuses including low power, no power, under charging and full. 3） Battery charging has two types: charging during power-on and charging during power-off. When the charging starts, the FWP will give a “du” alert. After the charging is completed, disconnect the power supply and disconnect the FWT from the charger.
ZTE WP560/960B/BD User Manual 15 FAQ Problems Solutions No display on LCD after Check the status of power switch, quality and connection the FWP is powered on of adapter and battery, otherwise change power adapter or battery. No display on LCD after Check if the battery is correctly installed, if the battery the FWP is powered on socket and plug are well connected, if the battery’s when its power is connection is broken or has welding problem, otherwise supplied by battery.
ZTE WP560/960B/BD User Manual customer service, or send emails to zte_mobile@zte.com.cn. We will reply to you as fast as possible and provide you with good after-sales services. 16 Specifications Model Frequency Max. Transmitting Power Air Interface Vocodec Max. Data Rate Bandwidth of Channel Operating Temperature Range of Humidity AC/DC Power Adapter Backup Battery Size (L * W *H) Weight WP560 WP960 Tx: Tx: 451.25~456.75MHz 1851.25~1908.75MHz Rx: Rx: 461.25~466.75MHz 1931.25~1988.
ZTE WP560/960B/BD User Manual 17 Legal Statement Users must follow User Manual in strict accordance during operations. If things undescribed in User Manual occur, don’t handle them by yourself but contact us or the local agent immediately. ZTE shall not be held responsible for the loss due to user’s misoperations. The product’s specifications are subject to change without notice.
