User manual

52
PHONE CALLS 53
PHONE CALLS
Adjusting Your Call Settings
Checking My Devices
From the home screen, tap Settings My Devices. From here
you can check the current device log-in information, as you may be
logged in on multiple devices at the same time using the current
account information.
To modify a device name to differentiate it from other log-in entries,
tap beside a listed device, enter a new name, and tap Save OK.
Changing E911 Address Information
You can update your emergency 911 address information at any
time. From the home screen, tap Settings Change E911
Address. You can add several addresses and choose one as the
default address.
Hiding/Showing Your Number When Calling
You can hide your number when calling. From the home screen, tap
Settings Caller ID Network Default Hide Number. Your
number will not show on the receiver device. To allow your number
to appear again, select Network Default, or select Show Number
to always show your number.
Forwarding Incoming Calls
The call-forwarding feature allows you to forward your incoming
calls to another phone number.
1. From the home screen, tap Settings Call Forwarding.
2. Tap an option (Always forward, Forward when unreachable,
Forward when busy, Forward when unanswered), enter
the forwarding phone number, and tap Update or Enable
(if feature previously disabled) to save the information.
Adjusting the Volume
1. From the home screen, tap Settings Sound Setting.
2. Drag the sliders below Media volume, Alarm volume, Ring
volume, and Notification volume to adjust the volume.
Note: You can adjust the media volume when a media application
is in use by pressing the Volume key. If no media application is
active, pressing the Volume key will adjust the ringtone volume
(or the earpiece volume during a call).
Setting Dolby Sound Enhancement
1. From the home screen, tap Settings Sound Setting
Dolby digital plus.
2. Slide the switch to turn on Dolby Power.
3. Tap an available option to choose it, or tap to manually adjust
the Dolby Audio™ effect.
Using Do Not Disturb
1. From the home screen, tap Settings Sound Setting
Do not disturb.
2. Tap Do not disturb and then choose an option:
• Tap Off to disable the feature.
• Tap On to enable the feature.
• Tap Scheduled to enable the feature.
3. If On or Scheduled is selected, tap Disturb rules and select
Priority only, Alarms only, or Total silence, depending on
whether you want to allow exceptions. Tap on or off the options
below Priority interruptions according to your needs.