User manual

112
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the United
States.
During SAR testing, this device was set to transmit at its highest
certied power level in all tested frequency bands, and placed in
positions that simulate RF exposure in usage near the body with
the separation of 0 mm. Although the SAR is determined at the
highest certied power level, the actual SAR level of the device
while operating can be well below the maximum value. This is
because the tablet is designed to operate at multiple power
levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna,
the lower the power output.
The exposure standard for wireless devices employing a unit of
measurement is known as the Specic Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.
This device complies with SAR for general population /
uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and has
been tested in accordance with the measurement methods and
procedures specied in IEEE1528.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model device is on le with the FCC and can be found under
the Display Grant section of www.fcc.gov/oet/ea/fccid aer
searching on FCC ID: SRQ-K92.
FOR YOUR SAFETY