MF920V Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
Getting to Know Your Device Appearance The following figure is for your reference only. 1. *External antenna connectors (not all the devices support) 2. Charging/micro-USB jack 3. Indicator light 4. Power key Press and hold for about 3 seconds to power on/off your device. Press and hold for about 10 seconds to restart your device. 5. WPS key Press and hold for 3 seconds to activate the WPS function. 6.
Getting to Know Your Device Indicator lights Indicator Battery Status Description Red solid / The battery is low. Please blinking charge the battery. Green The battery is being blinking charged. Green The battery level is middle solid or high. Light off Your device is not being charged. Wi-Fi Blue solid Wi-Fi is active. Blue WPS is active. blinking SMS Light off Wi-Fi is off. Blue solid You have unread messages. Blue You have new messages.
Red Error status. Not registered to the mobile network, no Network micro-SIM card inserted or no network service available. Green Registered to the 2G/3G solid mobile network. Green Connected to the 2G/3G blinking mobile network and data is being transferred. Blue solid Registered to the 4G LTE network. Blue Connected to the 4G LTE blinking network and data is being transferred.
Getting to Know Your Device Connection Scenarios The device allows multiple clients to surf on the Internet at the same time. The following figure is for your reference only. A micro-SIM card can be used to access the Internet.
Installing g Your Devic ce 1. Open the micro-SIM card cover. NOTE: Do not remove the cover rudely, bec cause it is connected d with the device. 2. Install a micrro-SIM card to the micro-SIM card slot. WARNING! Your device does not support SIM cards, c nano-SIM card ds or any other non-standard micro-SIM card ds. To avoid damag ge to the device, do not use u those cards or any card holders. 3. Close the micro-SIM m card coverr.
Connectting to Your Device Using Wi-F Fi 1. Power on yo our device. 2. Ensure thatt your computer orr other client devices have enabled Wi-Fi, and search for av vailable wireless netw works. NOTE: Refer to your Wi-Fi-ena abled client device ma anual for further details on how to search fo or wireless networks. If you use a compute er, you need to set yo our computer to obta ain an IP address automatically. 3. Select the Wi-Fi name (SSID)) of your device, and a click Connect. 4.
NOTE: If the system does not automatically y launch installation, you can double-click th he device installation n icon in My Computer to install the softw ware. 3. Wait until the computer is connected to yourr device successfully. Getting to t Know the e Wi-Fi SSID D and Passworrd You can view the label on the dev vice to get the default Wi-Fi SSID and pass sword. Logging in to th he 4G Mobile Hotspot Configuration Page 1.
Changing the Wi-Fi SSID or Password 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Wi-Fi Settings. 3. Change the Network Name (SSID) or the Password in the Main SSID area. 4. Click Apply. Accessing the Internet After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic.
3. Click to return to the home page, and then click or . NOTE: • To change current connection setting, please disconnect from network. • To modify the parameters of your device, log in to the 4G Mobile Hotspot configuration page. Configuring Your PC The following procedure describes how to configure the Internet Protocol in Windows 7 for your Wi-Fi connection. 1. Right-click Network and select Properties. 2. Select Change adapter settings. 3.
Warning and Notice To the Users • • • • • • • If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. Operating the device may interfere with medical instruments such as hearing aids and pacemakers.
• • • • • • • • When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. The device is not waterproof.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage. vii.
LEGAL INFORMATION Copyright © 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: R1.
Troubleshooting Problem Recommended Action The Install the software, and run the connection installation program in the path of My between your Computer. device and a If the driver of your device is PC through a abnormal, reinstall the software. You USB need to uninstall the software first. cable cannot be established. The enabled. connection between your Wi-Fi Check the IP address, and ensure that your client can automatically cannot obtain an IP address.
Troubles shooting Problem The Recommende ed Action clien nt available. connected to t the devic ce cannot acces ss the Internet. Ensure that your micro-SIM card c is Change th he location and find a place with good signal. Check the settings of the WAN connection n mode. Contact your y service provide er and confirm yo our APN settings. The 4G G Enter the e correct address. The Mobile default ad ddress is http://192.168.0.1 Hotspot or http://uffi.ztedevice.com.
FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 10 mm.
distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support bodyworn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided.
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
