MF910L Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
Getting to t Know You ur Device Appearanc ce The following fiigure is for your referrence only. 1. Power Key 2. WPS Key Press and a hold for 3 second ds to activate the WP PS function. Press to view the Wi-Fi SSID S and password d on the LCD screen. 3. (U)SIM Card d Cover and Reset Hole 4. LCD Screen 5.
Getting to t Know You ur Device Indicators When the devicce is powered on, the e following icons mayy be displayed on the LCD screen. s For a descrription of the icons, refer to the following table. Icon Description Network signal strength. s 2G, 3G, 4G Network system m type. The 4G, 3G or o 2G icon is displayed on the e LCD screen depending on the connected netwo ork. The user is in ro oaming status. Connected to the e Internet. One or more new w messages are rece eived.
Getting to t Know You ur Device Connection Scenarios The device can n access the Internett in two ways and it allows a multiple clients to surf on o the Internet at the e same time. The following figures are for your refference only. 4G Mode: A (U)SIM card can be used to access the Internet. I Internet Wi--Fi Mode: Your deviice can be connecteed to a WLAN device (such h as a hotspot device e or wireless router) through Wi-Fi to access the Internet. The WLAN W device musst be already o the Internet.
Installing g Your Devic ce 1. Open the (U)SIM card cover. NOTE: Do not remove the cover rudely, because it is co onnected with the device. 2. Install a (U)S SIM card to the (U)SIIM card slot. WARNING G! Your device doe es not support micrro-SIM cards, nano-SIM card ds or any other no on-standard SIM carrds. To avoid damage to the device, do not use th hose cards or any ca ard holders. 3. Close the (U)SIM card cover.
Connectting to Your Device Using Wi-F Fi 1. Power on yo our device. 2. Ensure that your computer or other o client devices have enabled Wi-Fi, and se earch for available wireless w networks. NOTE: Re efer to your Wi-Fi-e enabled client devicce manual for further details on o how to search forr wireless networks. If you use a computer, you need to set your computer c to obtain an a IP address automatically. W name (SSID) of your device, and clicck Connect. 3. Select the Wi-Fi 4.
Getting to Know th he Wi-Fi SS SID and Passworrd You can use th he following methodss to get the default Wi-Fi W SSID and password. View th he label on the device e. Press the WPS Key. The e Wi-Fi SSID and password p are displayyed on the screen. Logging in to the 4G 4 Mobile Hotspot Configurration Page 1. Ensure that the connection bettween your device and a the client device is corrrect. 2. Launch the Internet browser and enter http://19 92.168.0.1 or http://ufi.zte edevice.com in the address a bar.
Changing the Wi-Fi SSID or Password 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Settings > Wi-Fi Settings > Basic Settings. 3. Change the Network Name (SSID) or the Pass Phrase ( Password) in the Main SSID area. 4. Click Apply. Accessing the Internet 4G Mode After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic.
NOTE: To modify the parameters of yourr device, log in to th he 4G Mobile Hotspot configu uration page. Internet Wi-Fi Mode 1. Log in to the e 4G Mobile Hotspot configuration page. 2. Select Settin ngs > Internet Wi-Fii. 3. Set the Internet Wi-Fi Switch and a Preferred Netw work, and click Apply. NOTE: Yo ou need to set Interrnet Wi-Fi Switch to o Enable and Preferred Netw work to Wi-Fi. 4. Connect to the Wi-Fi hotspot. The following tw wo methods are for your y reference.
After the client device is connected to the Wi-Fi hotspot successfully, you can access the Internet. Configuring Your PC The following procedure describes how to configure the Internet Protocol in the Windows 7 operating system for your Wi-Fi connection. 1. Right-click Network and select Properties. 2. Select Change adapter settings. 3. Right-click Wireless Network Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties. 5.
Warning and Notice To the Owner • If inadequately shielded, • • • • • • • some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. Operating the device may interfere with medical instruments such as hearing aids and pacemakers.
Warning and Notice To the Users • Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. • Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. • The device is not waterproof. Keep the device dry and store it in a shady and cool place.
Warning and Notice iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage. vii.
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. LEGAL INFORMATION Copyright © 2015 ZTE CORPORATION. All rights reserved.
Troubleshooting Problem Recommended Action The connection Install the software, between your device and a run the Computer. If the driver of your device is abnormal, PC through a reinstall USB uninstall the software first. cable cannot and installation program in the path of My the software. You need to be established. The connection between your device and a established.
Troubleshooting Problem The Recommended Action client connected the to device cannot access Ensure that your (U)SIM card is available. Change the location and find a place with good signal. the Internet. Check the settings of the WAN connection mode. Contact your service provider and confirm your APN settings. The client cannot access the Internet in Ensure that the WLAN device has already been connected to the Internet.
