ZTE MF90 Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.
ZTE MF90 Getting Started LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.
ZTE MF90 Getting Started Getting to Know Your Device Appearance The following figure is only for your reference. The actual product may be different. 1. LED Indicators 2. Power Button 3. WPS Button 4. External Antenna Connector 5. Micro USB Port 6. (U)SIM Card Slot 7. RESET Button 8. microSD Card Slot NOTE: microSD logo is a trademark of SD Card Association. Indicators Indicator Status Red solid Description Error status.
ZTE MF90 Getting Started Battery LED light off Wi-Fi is off or your device is in sleep mode. Red solid/ blinking The battery is low. Please charge the battery. Green blinking The battery is being charged. Green solid The battery level is middle or high. LED light off Your device is in standby mode and not being charged, or the battery is not inserted.
ZTE MF90 Getting Started NOTE: The subnets of your device and other WLAN device must be different. Installing Your Device 1. Slide the back cover and remove it 2. Insert the (U)SIM card. IMPORTANT: Your device does not support Micro/Nano or any other nonstandard SIM cards. To avoid device damage, please do not use them. 3. Insert the microSD card if necessary.
ZTE MF90 Getting Started 4.Insert the battery. 5. Close the back cover. Connecting to Your Device Via Wi-Fi 1. Power on your device directly. 2. Use your normal Wi-Fi application on the client to search for the available wireless networks. NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.0.101”.
ZTE MF90 Getting Started 3. Select the SSID of your device, and then click Connect. NOTE: Please check the label on your device to get the default SSID. 4. Input the password, and then click Connect. NOTE: You may need to input the password for Wi-Fi connection. Please check the label on your device to get the default. 5. Wait a moment, and then the client will connect to your device successfully. Via USB Cable 1. Connect to the device.
ZTE MF90 Getting Started 2. Power on your device. 3. The OS detects and recognizes new hardware and finishes the installation automatically. NOTE: If the system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM. 4. Wait a moment, and then the client will connect to your device successfully. Using the WPS(Optional) If your client device supports WPS, you don’t have to input the password manually after WPS has been available.
ZTE MF90 Getting Started 4. Connect to the WLAN device. There are two methods for your reference. Select the WLAN device which will be listed in the Wi-Fi Hotspot area, and then click Connect. Click Add, input the WLAN device information in the Add Wi-Fi Hotspot area, and then click Apply. 5. After the client connected to the WLAN device successfully, you can access the Internet.
ZTE MF90 Getting Started 3. Select Internet Protocol(TCP/IP), and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration.
ZTE MF90 Getting Started Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary. • Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on.
ZTE MF90 Getting Started WARNING: If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor help if necessary. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii.
ZTE MF90 Getting Started NOTE: Please don’t use the Wi-Fi function of the device outdoors. Troubleshooting Problem Suggested Solution Can not establish the USB You need to install the software. Run the installation program in connection between your path of My Computer > ZTEMODEM. device and PC. If the driver of your device is abnormal, please reinstall the software. You need to uninstall the software first. Can not establish the Wi-Fi Make sure the Wi-Fi function is active.
ZTE MF90 Getting Started For more assistance, please: • Send E-mail to mobile@zte.com.cn • Visit http://www.zte.com.cn • Call Service Hotline: +86–755–26779999 FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ZTE MF90 Getting Started The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQMF90. For this device, the highest reported SAR value for near the body is 1.36 W/kg.
