MF833V USB Modem Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Edition Time: March 4, 2019 Manual No.
Getting to Know Your Modem Your modem supports data and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere. The following figure is only for your reference. The actual product may be different. 1. Modem cap 2. Front cover 3. Indicator light 4. USB connector 5. microSDHC™ card slot 6. micro-SIM card slot NOTE: microSDHC logo is a trademark of SD-3C, LLC. Installing the micro-SIM Card and microSDHC Card 1.
Do not open the front cover rudely. Failing to do so may cause damage to the front cover. 2. Install a micro-SIM card to the micro-SIM card slot. WARNING! Your modem does not support SIM cards and nano-SIM cards. To avoid damage to the modem, do not use those cards or any card holders. 3. Install a microSDHC card to the microSDHC card slot. 4. Slide the front cover gently back into place.
Connecting the Modem to Your PC Insert the modem into your computer’s USB port securely. The operating system automatically detects and identifies your modem and starts the installation wizard. NOTE: If the system does not launch installation automatically, you can double-click the modem installation icon in My Computer > ZTEMODEM to install the software. Accessing the Internet After the modem is connected to your computer successfully, you can access the Internet in Automatic or Manual mode.
Automatic Your modem is connected to the Internet automatically, and you can surf on the Internet directly. Manual 1. Log in to the 4G Hostless Modem configuration page. 2. Select Network Settings > Connection Mode > Manual, and then click Apply. 3.Click to return to the home page, and then click or . NOTE: To modify the parameters of your modem, log in to the 4G Hostless Modem configuration page by visiting http://192.168.0.1. Getting More Help You can get help by: l Sending an email to mobile@zte.
Warning and Notice Using Your Modem l If inadequately shielded, some electronic devices may be affected by the electromagnetic interference caused by the modem, such as the electronic system of vehicles. Consult the manufacturers of such devices before using the modem if necessary. l Operating the modem may interfere with medical instruments such as hearing aids and pacemakers. Always keep the modem more than 20 centimeters away from such medical instruments when your modem is turned on.
l The modem is not waterproof. Keep the modem dry and store it in a shady and cool place. l Do not use the modem immediately after a sudden temperature change. In such case, dew may be generated inside and outside the modem, so do not use it until it becomes dry. l Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem may be damaged. l Only qualified personnel can dismantle and repair the modem.
statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.
Specification This radio equipment operates with the following frequency bands and maximum radiofrequency power. NOTE: All ZTE products are compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model. GSM 900: 35 dBm GSM 1800: 32 dBm UMTS BAND I/VIII: 25 dBm LTE BAND 3/7/8/20: 25 dBm CE Caution USB Port This product shall only be connected to a USB interface of version USB 2.0.
Declaration of RoHS Compliance To minimize the environmental impacts and take more responsibilities to the earth we live on, this document shall serve as a formal declaration that ZTE MF833V manufactured by ZTE CORPORATION is in compliance with the Directive 2011/65/EU of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances: 1. Lead (Pb) 2. Mercury (Hg) 3. Cadmium (Cd) 4. Hexavalent Chromium (Cr (VI)) 5. Polybrominated biphenyls (PBBs) 6.
EU DECLARATION OF CONFORMITY Hereby, ZTE Corporation declares that the radio equipment type ZTE MF833V is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: http://certification.ztedevices.