MF656 USB Modem Quick Guide
Introduction The ZTE MF656 USB modem is a multi-mode 3G modem. With a USB interface connecting to your laptop or desktop computer, it supports data and SMS services through the mobile USB Modem network, helping you realize mobile communication anytime and anywhere. Hardware Installation Installing the SIM/USIM Card 1. Remove the back cover on the modem. 2. Hold your SIM/USIM card with the cut corner oriented as shown and then slide it into the card holder with the metal contacts facing the modem. 3.
Installing the Memory Card Only microSD card is supported by the modem and do not insert other memory cards into the modem. Insert the microSD card, orientated as shown, into the holder until you hear a click. Notes: The logo is a trademark. Connecting the USB Modem to Your Computer Remove the modem cap and plug the modem firmly into a USB port on your computer. Software Installation On different operating systems, the software installation procedures may be different.
• For Windows XP, Vista and Windows 7 When you connect the modem to your PC correctly, the system automatically recognizes it as a CD-ROM and starts the software installation wizard. If the system does not launch the installation wizard automatically, please start it by running the executable file in the new CD-ROM directory. • For Mac OS The system will automatically display a new CD-ROM icon on the desktop, when you connect the modem to your Mac correctly.
Functions Click the following buttons to access each function. Connect Connect to the Internet. SMS Send and receive text messages. USB Modembook Manage contacts information. Settings Configure the USB modem settings. Data record Show connection information.
Indication Modem Status Green solid Registered to a network Green blinking Active data transfer on the network Warning and notice Health and safety information Radio Frequency (RF) Energy This model USB Modem meets the government’s requirements for exposure to radio waves. This USB Modem is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
The exposure standard for wireless mobile USB Modems employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the USB Modem transmitting at its highest certified power level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this model USB Modem with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model USB Modem is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-MF656.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To the owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles.
• Operating of laptop and desktop PCs and the modem may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem.
Using your USB Modem • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception. • The modem is not waterproof. Please keep it dry and store in a shady and cool place.
recommended. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v.
such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.
product, or any downtime cost. LEGAL INFORMATION Copyright © 2010 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. ZTE CORPORATION NO.
Tel: (86) 755 26779999 URL: http://www.zte.com.cn E-mail: mobile@zte.com.
