MF296C Let’s go Getting started with your device 1
1. Prepare A valid nano-SIM card. View the label on your device to get the default information. The following figure is for reference only.
2. Insert the nano-SIM Card Insert the nano-SIM card into the nano-SIM card slot.
3. Power on Your Device Connect the power adapter to your device and then your device will be powered on and connect to the Internet automatically.
4. Access the Internet Wi-Fi: Get the default SSID and password on the label and connect to the Wi-Fi network with your mobile device, and then access the Internet.
Network cable(RJ45): Connect with the computer via LAN ports and then access the Internet.
5. Change Your Device Settings You can change the device settings by logging in to the 4G CPE configuration web page. 1. View the label on your device to get the default Device Manager Website IP address and Password. 2. Launch the Internet browser and enter the Device Manager Website IP address in the address bar. 3. Input the password and then click Login. 4. After the 4G CPE configuration web page is opened, you can change the Wi-Fi SSID, password or other settings.
Cable Broadband Mode Your device supports cable broadband mode and you can use this service from your service provider to access the Internet. 1. Connect the WAN/LAN1 port and the broadband service network port with a network cable. 2. Log in to the 4G CPE configuration web page. 3. Change operation mode to Cable Broadband Mode. NOTE: Please disconnect from the Internet first and then you can change mode. 4. Set the detailed parameters given by your service provider. 5.
Telephone Your device supports the telephone function. Before using the telephone function, connect the telephone and insert the nano-SIM card. To make a call: 1. Pick up the handset. 2. Dial the telephone number. 3. Wait for the call to be connected.
WPS Your device supports the WPS function. You can use this function to connect a client to your device. 1. Press the WPS button on your device to activate the WPS function. The Wi-Fi indicator is blinking. 2. Enable the WPS function on your client. 3. Follow the system prompts on your client to establish the connection.
Indicator Lights and Interfaces 1 White On: The device is powered on. Off: The device is powered off. 2 White solid: Wi-Fi is active. White blinking: WPS is active. Off: Wi-Fi is off.
Red: The device is in error status. The device is not registered to the mobile network. There is no nano-SIM card inserted. 3 There is no network service available. Blue solid: The device is registered to the 3G/2G mobile network. White solid: The device is registered to the LTE network. 4 NFC area Activate the NFC function on your android phone, put your phone here and then connect to the Wi-Fi network without entering the password. 5 micro-USB jack Only used by manufacturer.
Troubleshooting Internet Related Problems Symptoms I cannot access the Internet at all. Possible Problems / Solutions Please check your configuration settings. Please wait 1~ 2 minutes for the router to initialize. Check your network indicators. The download or upload speed is very The speed is dependent on signal strength. Check your slow. signal strength and network type. I cannot visit the 4G CPE configuration web page.
Voice Related Problems Symptoms There is no dial tone. Possible Problems/ Solutions Please wait for 1~2 minutes after the router is turned on. If the SIG indicator is weak, you have no good RF reception. Change the location of the router. There is a prompt / phone alert / Make sure your nano-SIM card is inserted correctly and announcement as soon as I lift the the PIN number has been entered. If the PIN number has phone off the hook.
Others Symptoms The signal indicator does not light. Possible Problems / Solutions This indicates poor reception. Try moving the device to another location near the window. For the default Wi-Fi connection password and the default password of the 4G CPE configuration web Problems with the passwords. page, please check the label on the device. If you have changed the passwords and forgotten them, you need to restore the device to the factory default settings.
Getting More Help You can get help by: Sending an email to mobile@zte.com.cn Visiting https://www.ztedevices.
LEGAL INFORMATION Copyright © 2022 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
Warning and Notice Safety Precautions • Some electronic devices may • • • • • • • • • • • • • be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference. The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using it. Please keep yourself at least 20 centimeters away from your device.
Cleaning and Maintaining • Use an antistatic cloth to clean the • device. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your device before you clean it. Use the device within the temperature range of -20℃ ~ +55 ℃ , and the storage temperature range is -40℃ ~ +70℃. The humidity range is 5%~95%. • Do not use your device during a thunderstorm. Remove the mains power pack from the wall socket.
been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. FCC Regulations: This device complies with part 15 of the FCC Rules.
Radio Frequency (RF) Exposure Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your device, the system handling your connection controls the power level at which your device transmits. Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with RF exposure guidelines the device must be used with a separation from the body.
(2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. IC: 5200E- MF296C IC Radiation Exposure Statement This device complies with IC radiation exposure limits set forth for an uncontrolled environment.
ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
