MF283U Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
Connecting Your Device Follow the number to connect your device. If you select a different operation mode, the connection of the LAN port will be different. Please refer to the chapter “Accessing the Internet”. If you want to use the mobile network to connect to the Internet or use your home phone, you need to insert your (U)SIM card first. WARNING! Your device does not support micro-SIM card, nano SIM card or any other nonstandard SIM cards.
Indicator 3G/4G State Description Red The device is turned on but not registered to the mobile network. Blue blinking The device is connected to the LTE network and data is being transferred. Blue solid The device is registered to the LTE network. Green blinking The device is connected to the 2G/3G network and data is being transferred. Green solid The device is registered to the 2G/3G network. NOTE: The phone function needs the network support.
Accessing the Internet Before accessing the Internet, please make sure that the following operations are finished. Your device is connected via a network cable or Wi-Fi. Your PC is configured. To access the Internet: 1. Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page appears. 2. Input the password and then click Login. NOTE: View the label on your device to get the default password. 3. View the Privacy Policy information and click AGREE. 4.
Cable Broadband Mode: You need to connect the WAN to the LAN1/ WAN port via a network cable and get the WAN information from your service provider. Wireless Broadband Mode: Your device will use the (U)SIM card to access the Internet. You need to insert the (U)SIM card first, and then you can set connection mode to Automatic or Manual. The default connection mode is Automatic. Automatic: In this mode, your device will choose the operation mode automatically.
Answering a Call When the phone rings, pick up the handset to answer it. If the telephone has hands-free function you also can answer the call by pressing the Hands-free button. Press the Hands-free button again to end the call. WPS Function Your device supports WPS function. You can use this function to connect the client to your device. 1. Power on your device, and start the WPS function. 2. Press the WPS button on your device to activate the WPS function. 3.
NOTE: You can view the label on your device to get the default Wi-Fi SSID and password. 5. Wait until the client device is connected to your device successfully. Troubleshooting Voice Related Problems Symptoms Possible Problems/ Solutions There is no dial tone. Please wait for 1~2 minutes after the router is turned on. If the SIG indicator is blinking, you have no good RF reception. Change the location of the router.
Symptoms Possible Problems/ Solutions protocol (TCP/IP) properties. Type the correct network key (Wi-Fi password) when you connect to the device. Others Symptoms Possible Problems/ Solutions The 3G/4G signal indicator does not light. This indicates poor reception. Try moving the router to another location near the window. For the Wi-Fi connection password, please check the label on the device. Please check the label on your device to get the default password of the 4G CPE page.
Do not place objects on top of the router. This may lead to overheating of the device. The device must be placed in ventilation environment for use. Do not expose the router to direct sunlight or store it in hot areas. High temperature can shorten the life of electronic devices. Do not allow children to play with the router or charger. Keep the length of the cable between the router and the phone less than 10 meters. The router is for indoor use only. Do not use the router outside.
implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.
