Feature Dimensions Description 182*124*70mm Weight about 650g Picture Artwork Solution Form factor 5G CPE(SA & NSA) Support: 5G NR CA 5G NR + LTE EN-DC User manual Quick guide Warranty cards Battery AC adapter Network cable EAN TAC Wireless chipset supplier Routing and WiFi chipset supplier 1 cable is included in the package Wireless chipset model SDX62 Wireless processor info Routing and WiFi chipset model SLIC Arm Cortex-A7 up to 1.
WIFI indication LED Network mode indication LED WAN signal strength indication LED LAN port LED Chipset SRS Waveform Sub Carrier Main antenna Antenna Gain GSM band UMTS band LTE band 5G Sub6 Band 5G mmWave Band Single color (White) Always on----WLAN working normally Blinkling----WPS is activing Red----Turn on but not register White Solid----Connect or Register to NSA or SA network Blue Solid----Connect or Register to 3G or LTE only 3 LED (White) The stronger the signal strenght is, the more LED light on Si
SA 5G Sub6 5G Sub6G -TDD DL 1.716 Gb/s UL 160Mb/s Bandwidth of Sub6G 40MHz, 60MHz, 80MHz, 100MHz, 50MHz, 90MHz Modulation Sub6G DL: 256QAM UL: 256QAM LTE DL:256QAM UL: 256QAM Technical standard BWP Network Slicling 3GPP release WiFi standard WiFi Band WiFi Speed WiFi security WPS IP protocols NAT/NAPT Browser Router ZTE Link Port forwarding IP filter DMZ UPnP VPN passthrough VPN Client Voice Fax SMS MMS Phonebook Network lock IPV4/IPV6 Language Firewall switch TR069 Release 16 802.
Online update HW buttons &switches FOTA Power button Reset button To restore factory default configurations after pressing for 3 seconds WPS button To activate the PBC(Push Button Config) function CE ROHS WEEE Approvals GCF &Certification FCC WiFi certification PTCRB REACH Operating temperature Storage temperature Humidity -20 to 55° C -40 to 70° C 5% to 95% Engineering samples 30. Jan 22 (yyyy/mm/dd) Final samples Market launch 30.
Support Yes Remarks Yes Optional Yes Optional No Yes Yes Optional Optional Can be customized Power Management: PMX65 Yes 4FF No Yes TypeC 3.
Show the better network mode signal strength. It's standand RJ45 LED status Yes N41, N77, N78, N79 Yes Yes No Yes Yes Yes No Yes Support SCS 30KHz for TDD bands and 15KHz for FDD bands Doesn't support mmWave by default. There are so many EN-DC ability on this device, if you want to know more abilty of this device to match your network, please provide your requirement and make further evaluation.
DL peak rates requires: 120MHz + 256QAM + 4MIMO 75% DL duty cycle; UL peak rates requires: 100MHz + 256QAM + 2MIMO 25% duty cycle. Yes Support different BWs for didiffent band; Support these BWs for n78 and n41; Yes Yes Yes Yes There is four bandwidth parts (BWPs) at most for receptions in a downlink bandwidth, but just one is active.
Yes No Yes Button located on the bottom of the device Yes Button located on the back of the device Yes Yes Yes Optional Optional Yes TBD Yes Yes Yes Yes Yes Yes Yes Can be provided if it is mandatory Can be provided if it is mandatory
